Forums › Devices › OSD335x-SM › EEPROM programming via JTAG
back in the process of board-bringup and fallen foul of a blank EEPROM.
Rather than building u-boot to bypass the EEPROM, for production it would be much simpler if we could just programme the EEPROM on fresh boards. Do you know of any code available that we could download via the JTAG to the main processor which would, in turn, programme the EEPROM?
thanks
Mat
Memaher,
Please take a look at baremetal code attached to the EEPROM application note: https://octavosystems.com/app_notes/osd335x-eeprom-during-boot/#_Toc382081438
Best,
Neeraj
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields