Hey again!
Looks like I’ve been a bit hasty!
I checked out some of the other posts and gave the ‘disable the EEPROM check’ a go. Guess what, it works!
Essentially, I followed this advice:
Made the change to boards.h and all is well.
Now USB and UART booting work just fine.
Hey Erik,
Thanks for your response and sorry for not acknowledging it sooner. I’ve used the pinmux tool from TI and have chosen to use the MII2 pins for Ethernet. I then used the Excel spreadsheets to cross check and choose the OSD335x-SM balls accordingly.
Do you offer a service to check through ball allocations and schematics?
Thanks,
Simon
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields