512-861-3400Log inCreate Account

scott_vubiq

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 9, 2021 at 5:56 pm in reply to: C-SIP RED Platform, pullups to SYS_VDD1_3P3V #11210
    Scott Hemmelgarnscott_vubiq
    Participant

      Neeraj,

      Thank you for your help.

      Scott

      January 26, 2021 at 10:17 am in reply to: C-SIP RED Platform, reset supervisor VCC #11160
      Scott Hemmelgarnscott_vubiq
      Participant

        Neeraj,

        Thank you for the detailed explanation, very helpful.

        Scott

        January 4, 2021 at 11:08 am in reply to: EMMC routing #11096
        Scott Hemmelgarnscott_vubiq
        Participant

          Erik,

          Thank you for the clarification, and for your help.

          Scott

          January 4, 2021 at 10:36 am in reply to: EMMC routing #11094
          Scott Hemmelgarnscott_vubiq
          Participant

            Erik,

            Thank you for the info.

            We’re actually modeling the design after the OSD3358-C-SiP-RED (I didn’t realize I was in the SM device section).Does the device tree definition still apply?

            Thank you,

            Scott

            December 30, 2020 at 1:16 pm in reply to: EMMC routing #11079
            Scott Hemmelgarnscott_vubiq
            Participant

              Hello Eshtaartha,

              Regarding your latest answer describing the zero-ohm jumper, can we eliminate this resistor in our custom design, i.e. provide a direct connection between CSIP pins B12 and A4?

              Thank you,

              Scott

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)

            Octavo Systems LLC all rights reserved
            OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.