[Tomas Jurena]

Hi,

I have noticed that the issue was caused because of incorrect PMIC configuration. Now It works as expected for the RED board.

Best,

Tomas

[Tomas Jurena]

Hello Neeraj,

thank you for the update. I have tried to compile it and flash it into the sd/emmc memory in the RED board. Unfortunately, the system won’t boot and I can’t even see any communication from the board on the serial debug console. Can you please provide me with a working image to verify my hardware and process?

I have used the meta-octavo-osd32mp1 layer with a guide from the kirkstone branch and as a build system I used KDE Neon 22.04.

Best regards,

Tomas

[Tomas Jurena]

Hello Neeraj,

once again I am asking if you made some progress in porting.

I was busy on some other project but now I should be able to work on this. If there was no work on porting, I will open a new thread and share my current state and issue.

Best regards,

Tomas

[Tomas Jurena]

Hi Neeraj,

any progress on this?

[Tomas Jurena]

Hello,

is there any progress? I have tried to migrate to STe 4.0.2 but can flash the device as it is restarting in a loop. I have opened and thread on ST community forum, but no answer yet. There seems to be a problem with the TF-A or perhaps with the u-boot but I do not know how to debug it.

Best wishes,

Tomas

[Tomas Jurena]

Hello,

what ST Ecosystem did you use? I have been migrating to the 3.1.0 from 2.1.0 and it gave me a headache before the device booted because the clock issues in TF-A tree xD

[Author]

Posts