ST-Link Connection issues with BRK Board

[aamann]

So I try to connect from Linux with help of an ST-Link V2 (china clone) ( and 2-1 from STM Nucleo72 board) type to the BRK Board. I am wondering why flash and sram are not readout correctly. Any advices?

================================
./st-info –probe
Found 1 stlink programmers
version: V2J37S27
serial: 0673FF555354885087124631
flash: 0 (pagesize: 0)
sram: 0
chipid: 0x074b
=================================

I used the ST-Link header and used the following Signals (2,3,4,10) , seen in the image.

Thanks in advance
Andreas

[Neeraj Kumar Reddy Dantu]

Andreas,

Apologies for the delayed reply. I don’t see any images in the post.

Please checkout this guide: https://octavosystems.com/forums/topic/getting-started-with-osd32mp1-brk-st-link-jtag-interface/ for reference on how to connect to the BRk via ST-Link.

Best,

Neeraj

[Author]

Posts