Getting started with OSD32MP1-BRK ST-Link/JTAG interface

[Eshtaartha Basu]

To get started with OSD32MP1-BRK ST-Link/JTAG interface:

1. Set the boot switches of OSD32MP1-BRK in Engineering boot mode: BOOT2 = 1; BOOT1 = 0; BOOT0 = 0. (For more on boot modes, see: https://wiki.st.com/stm32mpu/wiki/STM32MP157x-DKx_-_hardware_description#Boot_related_switches)

2. Connect OSD32MP1-BRK to host computer using the following:
2.a TC2050-IDC-NL 10-Pin No-Legs Cable with Ribbon connector – https://www.tag-connect.com/product/tc2050-idc-nl-10-pin-no-legs-cable-with-ribbon-connector
2.b TC2050-ARM2010 ARM 20-pin to TC2050 Adapter – https://www.tag-connect.com/product/tc2050-arm2010-arm-20-pin-to-tc2050-adapter
2.c ST-LINK/V2 or STLINK-V3 debugger and programmer – https://www.st.com/en/development-tools/st-link-v2.html#overview or https://www.st.com/en/development-tools/stlink-v3set.html#overview

3. Download and install STM32CubeIDE on host machine – https://www.st.com/en/development-tools/stm32cubeide.html

4. Steps to get started with Cube IDE can be found here – https://wiki.st.com/stm32mpu/wiki/How_to_get_started_with_STM32CubeIDE_from_scratch

5. Download and import example/demo projects from STM32Cube MP1 package into the IDE – https://wiki.st.com/stm32mpu/index.php/Getting_started/STM32MP1_boards/STM32MP157x-EV1/Develop_on_Arm%C2%AE_Cortex%C2%AE-M4/Install_STM32Cube_MP1_package

• This topic was modified 3 years, 7 months ago by Eshtaartha Basu.
• This topic was modified 1 year, 1 month ago by Neeraj Dantu. Reason: Correction in cable link

[Rob Barris]

did more digging, I think this is probably the path of least resistance for attaching BRK to STLink V3SET or V3Mini with STDC14 connectors.  It would be helpful if you could confirm that this will work.

TC2050-IDC-050-STDC14

curious, Rob

[Neeraj Dantu]

Rob,

Yes, TC2050-IDC-050-STDC14 should work. I verified the setup using items 2a + 2b + ST-Link V3 debugger from the original post.

Best,

Neeraj

[Author]

Posts