i2c error with rc_calibrate_mag

Forums Reference, Evaluation, and Development Boards OSD3358-SM-RED i2c error with rc_calibrate_mag

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • #14654
      Steve JohnsonSteve Johnson
      Participant

        Hi,

        I just received my OSD3358-SM-RED board, and I was attempting to follow the quick start video that talks about the REDSensorDisplay example. However, when running the rc_calibrate_imu and rc_calibrate_mag, I receive the following erros:

        ioctl slave address change failed
        rc_initialize)imu_dmp failed at rc_i2c_init
        Failed to complete maagnetometer calibration

        Is this familiar to anyone, and is there a fix?

      • #14659
        Neeraj Kumar Reddy DantuNeeraj Dantu
        Moderator

          The updated release of OSD3358-SM-RED software(v10.3) removed the sensors from userspace to the kernel space. So, you should be able to access the sensors in /sys/bus/iio/devices

           

          If you do want to utilize the userspace library, we suggest you use the v9.1 image. Both images are available here: https://octavosystems.com/octavo_products/osd3358-sm-red/#Software

           

          Best,

          Neeraj

      Viewing 1 reply thread
      • You must be logged in to reply to this topic.