Hi Neeraj,
1. Size and type of SD card
I tried a few other microSD cards from 2GB to 16GB, but this didn’t solve the problem.
2. Which MMC interface is the SD card connected to
I followed the DK2 schematics:
SDMMC1_D0 -> PC8
SDMMC1_D1 -> PC9
SDMMC1_D2 -> PC10
SDMMC1_D3 -> PC11
SDMMC1_CK -> PC12
SDMMC1_CMD -> PD2
uSD_DETECT -> PB7
I used both FlashLayout_sdcard_stm32mp157c-dk2-basic.tsv and FlashLayout_sdcard_stm32mp157c-dk2-trusted.tsv, with the same results.
Just out of curiosity, if you use a DK2 and remove the SD card before flashing the board with STM32CubeProgrammer, are you able to replicate the issue?
Thanks,
Verseau
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields