I can confirm that i don’t have issue building the image using latest debian. I can see that only RED raw image is generated..can this be used on BRK or do I need to do some extra steps?
Thanks
Is it possible to enter hibernation mode? I tried it out but it said that it was not compiled with the kernel?
Is it possible to get a low power consumption below 500uA using only the MCU and then wake up the MPU+RAM using some kind of business logic?
I know that NRF52840 which uses arm-m4f has power consumption in sleep mode around 20uA.
Do you have any suggestions?
Thanks.
Hi,
I don’t have ST-LINK debugger.
I also have issue building Debian as described in issues on https://github.com/octavosystems/osd32mp1-debian/issues/2
What could be the cause to the build problem?
Thanks
Thanks for the response.
Is there a way to find out how to optimize the consumption in powered off state? What should be the wakeup source in powered off state?
Thanks
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields