Mike

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Mike MaikaeferMike
    Participant

      H, StarterWareFree worked for me but may be I used a somewhat older version of it. I’m quite sure the guys from StarterWareFree  would happily accept a patch which fixes the problems you described 😉

       

      Mike MaikaeferMike
      Participant

        @Waseem: have you set the “pocketbeagle” compile switch as described?

        in reply to: SiP Integration Requests #4390
        Mike MaikaeferMike
        Participant

          It sounds like you are looking for a different SoC

          No, not necessarily. I also would be happy with exactly the same hardware and with my suggestion from point 1.

           

          in reply to: SiP Integration Requests #4381
          Mike MaikaeferMike
          Participant

            We have some long-term products which base on AM3358 / BeagleBone Black and would prefer to stay on this hardware-platform and board format.

            So to further-develop these products it would be great to have a fully AM335x-compatible SiP like the OSD335x (which easily could be used for a further-developed BeagleBone) but – in order of our priority – in future perhaps with:

            1. higher system clock (1GHz is meanwhile not so fancy and the lower end for compareable embedded devices)
            2. higher PRU clock
            3. larger L1 and L2 cache
            4. two or more 16 bit analogue outputs
            5. additional PRUs

            Regards

            Mike

             

            in reply to: OSD335x low level initalisation/application does not start #4149
            Mike MaikaeferMike
            Participant

              Hello Greg,

              finally I could solve this: the guys from the project at https://sourceforge.net/projects/starterwarefree/ have sources for a working MLO – not sure what the difference is to the one I tried, but the problem is fixed.

              Mike

               

              • This reply was modified 6 years, 11 months ago by Mike MaikaeferMike.
            Viewing 5 posts - 1 through 5 (of 5 total)