Hi Neeraj,
Thanks for your reply. I am going with QT, here are a couple of questions I would like to ask you before I get started:
1. The custom board I designed is based on PocketBeagle’s reference schematic design. The image available for PocketBeagle on BeagleBoard.org is “Debian 9.5 2018-10-07 4GB SD LXQT” which supports a graphical user interface that is 2 years old there are other latest images available that doesn’t support graphical interface, so the question is after I developed my own GUI using QT creator will I be able to use it on one of those non-LXQT images?
2. I am trying to set up a windows host machine to cross-compile the GUI, can direct me to where I can find the guide to do so and also I need to find out all the libraries or dependencies I need to install on the Target.
These questions may sound basic, please excuse me I am coming from a hardware background.
Thanks! your help is much appriciated.
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields