Neeraj,
I will try again.
I developed a board without the boot configurator,
i need make a new pcb. 🙁
Thank you
David
Hi Neeraj,
We have some difficulties in section 5., some errors appeared.
” 5. Configure and Build
– make ARCH=arm CROSS_COMPILE=${CC} distclean
– make ARCH=arm CROSS_COMPILE=${CC} am335x_evm_defconfig
– make ARCH=arm CROSS_COMPILE=${CC}
”
But for now i have an issue that must have been forgotten or I did not realize
The octavo need the “configuration” circuit in the image in attach?
Thank you.
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields