Forums › Devices › OSD32MP15x › STPMIC1A Turn-ON conditions
hello,
I understand, for a Turn-ON condition of the STPMIC1A, one of the below must take place:
-PONKEYn pin detection
-VBUS detection (voltage rising on
VBUSOTG or SWOUT pins)
-WAKEUP pin detection
-AUTO turn-ON feature
(taken from STPMIC1 datasheet, section 5.4.2, page 52).
One of the conditions, not all.
Am I correct?
thanks
Gil
gile_he,
That is correct. You can use any of the Turn-ON conditions you described from the PMIC datasheet.
Best,
Neeraj
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields