stm32mp15-mx.h

This topic has 6 replies, 2 voices, and was last updated 4 years, 4 months ago by Coder.

Viewing 6 reply threads

Author
Posts
- August 3, 2020 at 5:38 am #10466
  Coder
  Participant
  With CubeMX 5.6.1 and OSD32MP15x_MinimalConfig.zip from https://octavosystems.com/files/osd32mp15x_minimalconfig/ I get the dts and dtsi files for tf-a and u-boot as expected in the U-Boot device tree generated by CubeMX:
  /tf-a/stm32mp157c-osd32mp157c-512m-baa_minimalconfig-mx.dts
  /u-boot/stm32mp157c-osd32mp157c-512m-baa_minimalconfig-mx-u-boot.dtsi
  But stm32mp15-mx.h is missing for both tf-a and u-boot.
  What do I need to do to generate stm32mp15-mx.h?
- August 4, 2020 at 1:46 am #10473
  Tobias
  Participant
  Have you cloned the corresponding git repos?
  Arm Trusted Firmware
  https://github.com/STMicroelectronics/arm-trusted-firmware
  47 forks.
  32 stars.
  0 open issues.
  
  Recent commits:
  fix(stm32mp2-fdts): move stm32mp25 dk board on new SDMMC1 slew rateMove stm32mp25 dk board on new SDMMC1 slew rate.Change-Id: Ifa8ac2794fdb1b8f3f2a91a7bd99e0382aebd99bSigned-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416197ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  fix(stm32mp2-fdts): move stm32mp23 dk board on new SDMMC1 slew rateMove stm32mp23 dk board on new SDMMC1 slew rate.Change-Id: I22a75a8055182e9d37dca10ad9246b6e81d614beSigned-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416196Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  fix(stm32mp2-fdts): fix SDMMC1 slew rate on eval and dk boardNew slew rate applied: – for dk board: – clk at 2. – cmd and data at 1. – for eval board: – clk at 3. – cmd and data at 2.Change-Id: Ic7322524c8f549c9f8928b5c40c49c38434924e6Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416195ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  feat(stm32mp2): fix CPU1 wake-up from RUN2Allow CPU1 to wake-up from RUN2.Without the flag RCC_CPUBOOTCR_BOOT_CPU1 set,the CPU1 is set in HOLD BOOT after wake-up fromD1-Standby with CPU2 running.Change-Id: I472b1a9941bc13ce36134c06c254201090536d59Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/414303Domain-Review: Patrick DELAUNAY <patrick.delaunay@foss.st.com>Reviewed-by: Pascal PAILLET <p.paillet@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Tested-by: Pascal PAILLET <p.paillet@st.com>Reviewed-by: Patrick DELAUNAY <patrick.delaunay@foss.st.com>ACI: CIBUILD <MDG-smet-aci-builds@list.st.com>, Maxime MERE
  feat(stm32mp2): limit low power mode when cortex-M0 is runningNOT UPSTREAMABLEIf the Cortex-M0 firmware is running, the LPLV-Stop1/2 and Standby modesare not allowed. This temporary restriction is needed to avoid Cortex-M0crash when D3 domain clock switch from flexclkgen clock source to localclock source.This workaround will be removed when this restriction will be understood.Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>Change-Id: I37da73712388e9718e6f6b210249c65371455a8fReviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/411570ACI: CIBUILD <MDG-smet-aci-builds@list.st.com>ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>, Maxime Méré
  For example this one I used to compile the tf-a.
- August 4, 2020 at 4:36 am #10475
  Coder
  Participant
  I used tf-a-stm32mp-2.2.r1-r0 from en.SOURCES-tf-a-stm32mp1-openstlinux-5-4-dunfell-mp1-20-06-24.tar.xz, applied the patches and the dts file frmo CubeMX. That is where I was missing stm32mp15-mx.h – in the tutorial under 7.0 (https://octavosystems.com/app_notes/stm32mp1-cubemx-tutorial-for-osd32mp15x/) it says to also copy the Custom TF-A Device Tree source files.
  So I can compile the tf-a, but when I flash it, it gets stuck running the program and then errors out:
  Memory Programming …
  Opening and parsing file: tf-a-stm32mp157c-ev1-trusted.stm32
  File : tf-a-stm32mp157c-ev1-trusted.stm32
  Size : 212104 Bytes
  Partition ID : 0x01
  Download in Progress:
  100%
  File download complete
  Time elapsed during download operation: 00:00:00.548
  RUNNING Program …
  PartID: :0x01
  Error: an error occured while uploading data from the virtual partition 0xF1
  Start operation done successfully at partition 0x01
  - This reply was modified 4 years, 4 months ago by Coder.
- August 4, 2020 at 4:42 am #10478
  Tobias
  Participant
  CubeMX prior to version 6 seems to be incompatible to openstlinux-5-4-dunfell-mp1-20-06-24.
  What I did is using CubeMX 6.0 install the SDK and the mentioned sources.
  After that I extracted the compressed tarballs in the source folder.
  Then I cloned the git projects from st and copied the files to the source folder.
  Added the board filename to the Makefile and compiled it.
  That worked with the exception of das U-Boot which will not boot if I exchanged the original one.
  EDIT: I use Linux and the dd command to directly write the stm32 files to sd card
  - This reply was modified 4 years, 4 months ago by Tobias.
  - This reply was modified 4 years, 4 months ago by Tobias.
- August 4, 2020 at 6:21 am #10481
  Coder
  Participant
  I think stm32mp15-mx.dtsi is the header file! So when they mention stm32mp15-mx.h in the readme it should be stm32mp15-mx.dtsi.
  I upgraded the CubeMX project to 6.0 and generated the code again.
  Now when I execute:
  make -f $PWD/../Makefile.sdk TFA_DEVICETREE=stm32mp157c-osd32mp1-mx TF_A_CONFIG=trusted ELF_DEBUG_ENABLE='1' all
  1
  make -f $PWD/../Makefile.sdk TFA_DEVICETREE=stm32mp157c-osd32mp1-mx TF_A_CONFIG=trusted ELF_DEBUG_ENABLE='1' all
  I get the following error:
  fdts/stm32mp157c-osd32mp1-mx.dts:14:10: fatal error: dt-bindings/soc/st,stm32-etzpc.h: No such file or directory
  14 | #include <dt-bindings/soc/st,stm32-etzpc.h>
  I copied the files from /CA7/DeviceTree/OSD32MP1/tf-a/ to /tf-a-stm32mp-2.2.r1/fdts
- August 4, 2020 at 6:44 am #10482
  Tobias
  Participant
  You forgot to copy the github repo!
  Arm Trusted Firmware
  https://github.com/STMicroelectronics/arm-trusted-firmware
  47 forks.
  32 stars.
  0 open issues.
  
  Recent commits:
  fix(stm32mp2-fdts): move stm32mp25 dk board on new SDMMC1 slew rateMove stm32mp25 dk board on new SDMMC1 slew rate.Change-Id: Ifa8ac2794fdb1b8f3f2a91a7bd99e0382aebd99bSigned-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416197ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  fix(stm32mp2-fdts): move stm32mp23 dk board on new SDMMC1 slew rateMove stm32mp23 dk board on new SDMMC1 slew rate.Change-Id: I22a75a8055182e9d37dca10ad9246b6e81d614beSigned-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416196Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  fix(stm32mp2-fdts): fix SDMMC1 slew rate on eval and dk boardNew slew rate applied: – for dk board: – clk at 2. – cmd and data at 1. – for eval board: – clk at 3. – cmd and data at 2.Change-Id: Ic7322524c8f549c9f8928b5c40c49c38434924e6Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/416195ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Tested-by: Christophe KERELLO <christophe.kerello@st.com>Domain-Review: Christophe KERELLO <christophe.kerello@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>, Maxime MERE
  feat(stm32mp2): fix CPU1 wake-up from RUN2Allow CPU1 to wake-up from RUN2.Without the flag RCC_CPUBOOTCR_BOOT_CPU1 set,the CPU1 is set in HOLD BOOT after wake-up fromD1-Standby with CPU2 running.Change-Id: I472b1a9941bc13ce36134c06c254201090536d59Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/414303Domain-Review: Patrick DELAUNAY <patrick.delaunay@foss.st.com>Reviewed-by: Pascal PAILLET <p.paillet@st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>Tested-by: Pascal PAILLET <p.paillet@st.com>Reviewed-by: Patrick DELAUNAY <patrick.delaunay@foss.st.com>ACI: CIBUILD <MDG-smet-aci-builds@list.st.com>, Maxime MERE
  feat(stm32mp2): limit low power mode when cortex-M0 is runningNOT UPSTREAMABLEIf the Cortex-M0 firmware is running, the LPLV-Stop1/2 and Standby modesare not allowed. This temporary restriction is needed to avoid Cortex-M0crash when D3 domain clock switch from flexclkgen clock source to localclock source.This workaround will be removed when this restriction will be understood.Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>Change-Id: I37da73712388e9718e6f6b210249c65371455a8fReviewed-on: https://gerrit.st.com/c/mpu/oe/st/tf-a/+/411570ACI: CIBUILD <MDG-smet-aci-builds@list.st.com>ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>Reviewed-by: Maxime MERE <maxime.mere@foss.st.com>, Maxime Méré
  you can find the file in the directories:
  include/dt-bindings/soc
- August 4, 2020 at 8:00 am #10483
  Coder
  Participant
  Ah yes, I missed that in step 4 of /tf-a-stm32mp-2.2.r1-r0/README.HOW_TO.txt. I compiles the custom CubeMX board now.
  Thanks Tobias!
Author
Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.