OSD3358-512M-BAS Reball

[Javas Nune]

Does Octavo reball their parts?

We had to remove the part from our PCB due to a layout error. The datasheet shows “(Top View)” above the bottom view figure, which caused confusion for our layout service provider (See Attached).

After we remove the part, the balls in the BGA may become compromised. Can Octavo fix the balls for us on the parts we remove from the PCB?

 

Attachments:

1. 

   Screenshot-8.png
   

[Neeraj Dantu]

Javas,

We do not re-ball parts, but we have worked with several rework outfits to re-ball parts successfully for debug. We recommend paying close attention to the storage and reflow requirements outlined in sections 9.2 and 9.3 of the datasheet: https://octavosystems.com/docs/osd335x-datasheet/. Baking is recommended before any reflow events as the devices will have been stored in uncontrolled environment.

 

Best,

Neeraj

[Author]

Posts