512-861-3400Log inCreate Account

OSD32MP1-BRK with Buildroot

Forums › Reference, Evaluation, and Development Boards › OSD32MP1-BRK › OSD32MP1-BRK with Buildroot

Viewing 2 reply threads
  • Author
    Posts
    • June 2, 2021 at 7:46 am #11595
      RIDET AudrainAudrain_RDT
      Participant

        Hi, I am french so excuse me for my english 🙂

        I try to build an embedded system with buildroot for the OSD32MP1-BRK, so I used the stm32mp157c-dk2_defconfig to start the build and I would like to change the device tree to adapt it for the board, but I don’t know how can I do this and if it’s possible with buildroot.

        Best regards,

        Audrain

         

      • June 2, 2021 at 8:23 am #11596
        mkleox
        Participant

          This is also our question.

          @octavo: Thanks for helping us.

        • June 8, 2021 at 5:28 pm #11607
          Neeraj Dantu
          Moderator

            Audrain,

            Please refer to Buildroot documentation for this: https://buildroot.org/downloads/manual/manual.html#adding-board-support. We are working on adding more build system support for OSD32MP1 dev boards. Currently, we recommend working with OpenSTLinux.

            Best,

            Neeraj

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.

        Octavo Systems LLC all rights reserved
        OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.