CubeMX ioc default configuration
Forums › Reference, Evaluation, and Development Boards › OSD32MP1-BRK › CubeMX ioc default configuration
- This topic has 4 replies, 3 voices, and was last updated 4 years, 10 months ago by
yme.
- AuthorPosts
- August 4, 2020 at 4:36 am #10476
TobiasParticipantHello,
ist there a default ioc file for this board?
If it is where can I find it? - August 4, 2020 at 5:10 pm #10487
Neeraj Kumar Reddy DantuModeratorTobias,
Currently there is no CubeMX file for this board. The board device tree can be accessed here: https://github.com/octavosystems/osd32mp1-brk-device-tree.
We are planning on CubeMX based collateral around the BRK in a near future.
Best,
Neeraj
- August 4, 2020 at 11:17 pm #10488TobiasParticipant
I found that one but I had several problems with it.
First this seems to be incompatible with SDK 2.0.
Second i wanted strictly to avoid manual device tree configuration (except some entries that seem to cause problems e.g. sound).
Some I am missing at the moment. - August 5, 2020 at 10:00 am #10493Neeraj Kumar Reddy DantuModerator
We are currently working on updating our images to OpenST v2.0 and will create an CueMX file as part of this effort. Will keep you updated here.
Best,
Neeraj
- August 17, 2020 at 11:19 am #10533ymeParticipant
Any news on the CubeMX (ioc) project becoming available? I bought the prototyping board to check how the flashing process works including the setup in the CubeMX project.
- AuthorPosts
- You must be logged in to reply to this topic.