CubeMX and bootloaders

[yme]

Hi,

We have a completely custom board here with an OSD32MP15x that is going to ship hundreds of units. As a stepping stone to flashing on our board we bought the OSD32MP1-BRK so we can go through the flashing process and ensure that we are doing that part correctly.

We would like to get the:
-CubeMX project
-u-boot.stm32 + tf-a.stm32 + flash.tsv + linux.img (linux.img was found in “getting started” the remaining 3 files are the most important since we can flash with this confirming the flashing procedure)

We already have the device tree (https://github.com/octavosystems/osd32mp1-brk-device-tree) but this only helps us confirm a small part of the process. Since the board (unfortunately) comes preloaded with these bootloaders I was not able to find the two points above.

Please help us out, thank you.

Greetings,
Yme

• This topic was modified 4 years, 4 months ago by yme.
• This topic was modified 4 years, 4 months ago by yme.

[Author]

Posts