CANBUS CAPE

[gbrack]

Can anybody recommend a CAPE module with either CANFD or CAN bus that works with the OSD3358-SM-RED board?

[Neeraj Dantu]

G,

There are more than one ways to prototype with CAN bus.

1. BeagleboneBlue comes with a CAN PHY on board(https://beagleboard.org/blue)

2. You can use a CAN evaluation module(ex: http://www.ti.com/tool/tcan1042devm) and wire it up to RED board

3. There are several DIY solutions. A couple are linked below, but not tested by Octavo:

– http://www.thomas-wedemeyer.de/beaglebone-canbus-python.html

– http://www.instructables.com/id/DIY-Beaglebone-CAN-Bus-Cape/

Hope that helps

[Author]

Posts