Adding a USB Client Port to your Design
- This topic has 0 replies, 1 voice, and was last updated 2 years, 2 months ago by
.
Viewing 0 reply threads
Viewing 0 reply threads
- The forum ‘OSD32MP15x FAQ’ is closed to new topics and replies.
Forums › Devices › OSD32MP15x › OSD32MP15x FAQ › Adding a USB Client Port to your Design
Neeraj Dantu.If you are planning to add the USB client port to your design, the OSD32MP1-BRK design would work. In addition, we recommend connecting the OTG_VBUS, VBUS_OTG and OTG_ID as shown in sheet 88 of STM32MP157C-EV1 schematic shown here: https://www.st.com/content/ccc/resource/technical/layouts_and_diagrams/schematic_pack/group0/10/9b/9c/41/45/78/41/eb/mb1262-c01_schematic/files/MB1262-C01_schematic.pdf/jcr:content/translations/en.MB1262-C01_schematic.pdf.
Octavo Systems LLC all rights reserved
OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields