512-861-3400Log inCreate Account

USB downstream devices

Forums › Reference, Evaluation, and Development Boards › OSD3358-SM-RED › USB downstream devices

Viewing 1 reply thread
  • Author
    Posts
    • May 21, 2019 at 11:05 am #8194
      Roman Fillerrfiller73
      Participant

        Hello Octavo —

        How are the USB downstream devices connected to X5B or X4 connectors get powered up? There is no circuitry designed-in on the schematic that enables power to downstream devices. Is it done via OS? If it is, what is the exact method of communication with USB hub to configure appropriate registers? I2C, UART, ?

        Please advice.

        Thanks for support.

        Roman

         

      • May 21, 2019 at 5:33 pm #8198
        Neeraj Kumar Reddy DantuNeeraj Dantu
        Moderator

          Roman,

          U15(TPS2051) provides power to the USB devices. You can see that the output of this chip connects to the VBUS lines of each of the USB ports. This power switch is enabled by USB1_DRVVBUS signal of the USB1 peripheral controlled by the OS.

          Please let us know if you have more questions.

          Best,

          Neeraj

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.

      Octavo Systems LLC all rights reserved
      OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.