Which regulator controls MMC3 IO voltage?
Forums › Devices › OSD335x-SM › Which regulator controls MMC3 IO voltage?
- This topic has 2 replies, 2 voices, and was last updated 2 months, 3 weeks ago by
Eshtaartha Basu.
Viewing 2 reply threads
- AuthorPosts
- August 9, 2024 at 12:44 pm #14914
We have a 3.3V SDIO card attached to the MMC3 interface:
123456789101112131415161718AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (T7) gpmc_clk.mmc2_clk */AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (R7) gpmc_csn3.mmc2_cmd */AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (P6) gpmc_ad12.mmc2_dat0 */AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (R6) gpmc_ad13.mmc2_dat1 */AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (T6) gpmc_ad14.mmc2_dat2 */AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3 ) /* (P7) gpmc_ad15.mmc2_dat3 */And we have copied the beaglebone black entry:wlan_en_reg: fixedregulator@2 {compatible = "regulator-fixed";regulator-name = "wlan-en-regulator";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;startup-delay-us= <70000>;/* WL_EN */gpio = <&gpio3 9 0>;enable-active-high;};But our signals are still driving to 5V. How do we change the VIO voltage on these pins?
Thanks
- August 12, 2024 at 9:02 am #14916
It appears that not all signals are driving to 5V, only the clock is showing a 5.3V p-p voltage.
- August 15, 2024 at 12:27 pm #14927
Doug Springer,
We need some more information on your use case to help you better.
1. Are you using an official OSD335x-SM board or a custom version of it?
1.a If this is a custom board, are all the VDDSHVx pins tied to 3.3V?
1.b Do you have any pull ups on MMC3 pins?2. It’ll be very helpful if you can share your full device tree files and at least the MMC3 interface, VDDSHV connections part of Schematics.
- AuthorPosts
Viewing 2 reply threads
- You must be logged in to reply to this topic.