Austin, TX 512-861-3400 Log in Create Account

QSPI not detected in U-Boot

This topic has 1 reply, 2 voices, and was last updated 9 months, 1 week ago by Neeraj Dantu.

Viewing 1 reply thread

Author
Posts
- January 25, 2024 at 7:21 pm #14281
  FLeblanc OTI
  Participant
  Hello!
  I am trying to boot from QSPI, so first I want to flash it using uboot.
  In U-Boot, the QSPI is not detected, even if I enabled QSPI support in petalinux-config -c uboot.
  I successfuly got this working with another SoM, but it’s not working with the OSDZU3… when I try sf probe, I get this error:
  ZynqMP> sf probe 0 0 0 jedec_spi_nor spi_flash@0:0: unrecognized JEDEC id bytes: ff, ef, aa Failed to initialize SPI flash at 0:0 (error -2)
  1
  2
  3
  ZynqMP> sf probe 0 0 0
  jedec_spi_nor spi_flash@0:0: unrecognized JEDEC id bytes: ff, ef, aa
  Failed to initialize SPI flash at 0:0 (error -2)
  How can I make sure that this QSPI is supported by UBoot? Which brand of QSPI is it??
  Also, I think I have an engineering sample of the OSDZU3… is there a know issue with the QSPI flash?
  Note: The xilinx and zynq spi /qspi drivers were enabled in the UBoot config.
  Thanks!
  Frank
  - This topic was modified 9 months, 2 weeks ago by FLeblanc OTI.
- January 31, 2024 at 6:04 pm #14294
  Neeraj Dantu
  Moderator
  FLeblanc,
  For ES parts, QSPI boot is not supported as it is a NAND SPI that Xilinx does not support. That is why you are seeing “unrecognized JEDEC id bytes”. Production parts have QSPI that is supported in Xilinx ecosystem. Please check the datasheet for the version you need as there is a 1.8V part(-xFA) and 3.3V QSPI part(-xFB).
  Best,
  Neeraj
Author
Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.