512-861-3400Log inCreate Account

Sound subsystem on RED board?

Forums › Reference, Evaluation, and Development Boards › OSD32MP1-RED › Sound subsystem on RED board?

Viewing 1 reply thread
  • Author
    Posts
    • March 23, 2021 at 1:56 pm #11380
      Carlos Perezcoloradocarlos
      Participant

        The default DTS has a “sound” node in the device tree as an “audio-graph-card”. I can’t find any “sound” or “audio” components on the schematic and I think this is an oversight.

        Does the RED board come with some sort of audio capability separate from HDMI?

        Thank you! Carlos

      • March 29, 2021 at 12:47 pm #11389
        Neeraj Kumar Reddy DantuNeeraj Dantu
        Moderator

          Carlos,

          Apologies for the late reply. OSD32MP1 is connected to the HDMI Framer via I2S interface for Audio. So, the RED board does support audio through HDMI.

          There are no audio codecs on the RED board. If you are looking for a codec implementation, please take a look at STM32Mp157c-DK2(https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html). OSD32MP1 version of this board is available as a reference design here: https://octavosystems.com/octavo_products/osd32mp15x/#Reference%20Designs.

          Best,

          Neeraj

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.

      Octavo Systems LLC all rights reserved
      OCTAVO is registered in the U.S. Patent and Trademark Office. OSD, C-SiP, and the Octavo Logo are trademarks of Octavo Systems LLC.