Distribution Package
Forums › Reference, Evaluation, and Development Boards › OSD32MP1-BRK › Distribution Package
Tagged: Dev Boards
- This topic has 2 replies, 2 voices, and was last updated 3 years, 8 months ago by
Neeraj Dantu.
- AuthorPosts
- February 26, 2021 at 12:00 pm #11324
Does Octavo plan to create machine.conf files for any of the development boards in order to use the Distribution package from STMicro instead of using the snapshots from the developer package?
- March 2, 2021 at 10:03 am #11328
We essentially used the following link for the BRK board.
https://wiki.st.com/stm32mpu/wiki/How_to_create_your_own_machine
We used the Minimal Config to generate the device trees within CubeMX.
We then copied the mx\project\ into our Distribution package and build.
Lastly, we used the script to generate the SD card image from the .tsv and flashed it to the board, but the board hangs on boot with PANIC at PC : 0x2ffda41b Exception mode=0x00000016 at: 0x2ffda41b.
Is what we are trying possible? Do the patches in the octavo github matter? It appeared some of it was for patching the Developer package to build correctly.
- March 4, 2021 at 12:45 pm #11331
mlarkin,
It looks like there is a misconfiguration in the device tree. Exceptions at TF-A occur mainly because there is a clock tree issue. Please take a look at https://github.com/octavosystems/OSD32MP1-BRK-device-tree for a working device tree. You can compare the device tree you generated with the minimal config project and see where there is a difference in configuration.
The developer package provides a nice way to develop the initial image because it is easy to modify each of the components of the image. Once validated, these can be transferred over to the distribution package to generate image from scratch and make necessary image level configurations.
Direct support for Distribution Package for the BRK board is in the works.
Best,
Neeraj
- AuthorPosts
- You must be logged in to reply to this topic.