Embedded Linux boot
Forums › Reference, Evaluation, and Development Boards › Embedded Linux boot
Tagged: #linux boot #custom_boards
- This topic has 1 reply, 2 voices, and was last updated 3 years, 10 months ago by
Erik Welsh.
- AuthorPosts
- December 18, 2020 at 4:50 am #11043
Could we write a custom program into SPL/MLO section? Consider that we wont use u-boot or linux kernel and guarentee that our memory consumption in less than 128KB.
If we wont use linux kernel then u-boot is really necessary?I mean , I want to prepare SPL/MLO as custom program loader is it possible to load the custom program to DDR memory and continue to execute it?
Regards,
Jennifer - December 21, 2020 at 11:34 am #11049
Jennifer,
Yes, you can write custom programs on the AM335x that do not use Linux. The biggest issue is all of the system initialization that is required to get the processor and DDR up and running. There are a couple of paths to follow:
1) You can use the TI StarterWare: https://processors.wiki.ti.com/index.php/StarterWare While you don’t necessarily need U-Boot, you can see an example of using U-Boot to load a StarerWare program in our application note: https://octavosystems.com/app_notes/bare-metal-on-osd335x-using-u-boot/ However, please note that TI no longer supports this software package.
2) You can use the TI-RTOS: https://www.ti.com/tool/PROCESSOR-SDK-AM335X This includes boot loaders and boot utilities.
You can prototype this development on the OSD3358-SM-RED. However, you might want to get a JTAG debugger and populate the JTAG header to make it easier to interface with Code Composer Studio.
Please let us know if you have any additional questions.
Thanks,
Erik
- AuthorPosts
- You must be logged in to reply to this topic.