Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.108-ti-r102 (startic@startic-HP-ZBook-15-G2) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #0 SMP PREEMPT Sun Mar 31 9 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Octavo Systems OSD335x-SM Reference Design [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @df928000 s41548 r8192 d23988 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 445704K/522240K available (13312K kernel code, 1084K rwdata, 4236K rodata, 1024K init, 361K bss, 27384K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0e00000 (14304 kB) [ 0.000000] .init : 0xc1400000 - 0xc1500000 (1024 kB) [ 0.000000] .data : 0xc1500000 - 0xc160f1f8 (1085 kB) [ 0.000000] .bss : 0xc1619964 - 0xc1673e80 ( 362 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40946 entries in 121 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000040] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000054] OMAP clocksource: timer1 at 24000000 Hz [ 0.000732] timer_probe: no matching timers found [ 0.000948] Console: colour dummy device 80x30 [ 0.000978] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000987] This ensures that you still see kernel messages. Please [ 0.000994] update your kernel commandline. [ 0.001020] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.046941] pid_max: default: 32768 minimum: 301 [ 0.047210] Security Framework initialized [ 0.047229] Yama: becoming mindful. [ 0.047271] AppArmor: AppArmor disabled by boot time parameter [ 0.047349] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.047366] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.048400] CPU: Testing write buffer coherency: ok [ 0.048478] CPU0: Spectre v2: using BPIALL workaround [ 0.048944] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.063046] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.070960] Hierarchical SRCU implementation. [ 0.082084] EFI services will not be available. [ 0.086965] smp: Bringing up secondary CPUs ... [ 0.086986] smp: Brought up 1 node, 1 CPU [ 0.086998] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.087009] CPU: All CPU(s) started in SVC mode. [ 0.088678] devtmpfs: initialized [ 0.103261] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.103735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.103766] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.107763] xor: measuring software checksum speed [ 0.146976] arm4regs : 1217.000 MB/sec [ 0.186933] 8regs : 956.000 MB/sec [ 0.226931] 32regs : 1051.000 MB/sec [ 0.266931] neon : 1653.000 MB/sec [ 0.266943] xor: using function: neon (1653.000 MB/sec) [ 0.266965] pinctrl core: initialized pinctrl subsystem [ 0.268184] NET: Registered protocol family 16 [ 0.271217] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.295709] omap_hwmod: debugss: _wait_target_disable failed [ 0.336329] cpuidle: using governor menu [ 0.342103] OMAP GPIO hardware version 0.1 [ 0.355617] No ATAGs? [ 0.355638] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.355973] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.355989] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.383082] raid6: using algorithm neonx8 gen() 0 MB/s [ 0.383106] raid6: .... xor() 0 MB/s, rmw enabled [ 0.383117] raid6: using neon recovery algorithm [ 0.390198] edma 49000000.edma: TI EDMA DMA engine driver [ 0.393612] SCSI subsystem initialized [ 0.395414] usbcore: registered new interface driver usbfs [ 0.395484] usbcore: registered new interface driver hub [ 0.395598] usbcore: registered new device driver usb [ 0.396168] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.396234] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.396355] media: Linux media interface: v0.10 [ 0.396401] Linux video capture interface: v2.00 [ 0.396556] pps_core: LinuxPPS API ver. 1 registered [ 0.396568] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396592] PTP clock support registered [ 0.397304] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.399252] FPGA manager framework [ 0.399348] Advanced Linux Sound Architecture Driver Initialized. [ 0.400037] NetLabel: Initializing [ 0.400053] NetLabel: domain hash size = 128 [ 0.400061] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.400147] NetLabel: unlabeled traffic allowed by default [ 0.403328] clocksource: Switched to clocksource timer1 [ 0.541666] VFS: Disk quotas dquot_6.6.0 [ 0.541819] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.553704] NET: Registered protocol family 2 [ 0.554604] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.554656] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.554717] TCP: Hash tables configured (established 4096 bind 4096) [ 0.554841] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.554867] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.555087] NET: Registered protocol family 1 [ 0.564111] RPC: Registered named UNIX socket transport module. [ 0.564131] RPC: Registered udp transport module. [ 0.564140] RPC: Registered tcp transport module. [ 0.564149] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.565157] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.565429] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.566957] audit: initializing netlink subsys (disabled) [ 0.568381] audit: type=2000 audit(0.568:1): state=initialized audit_enabled=0 res=1 [ 0.568522] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.574349] zbud: loaded [ 0.581870] NFS: Registering the id_resolver key type [ 0.581930] Key type id_resolver registered [ 0.581940] Key type id_legacy registered [ 0.581961] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.582330] fuse init (API version 7.26) [ 0.592245] Key type asymmetric registered [ 0.592270] Asymmetric key parser 'x509' registered [ 0.592397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.596746] io scheduler noop registered [ 0.596765] io scheduler deadline registered [ 0.597025] io scheduler cfq registered (default) [ 0.597042] io scheduler mq-deadline registered [ 0.598313] pinctrl-single 44e10800.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.598673] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.602235] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 0.603838] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.607557] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.261413] random: fast init done [ 1.449111] console [ttyS0] enabled [ 1.455154] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.462527] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 1.469244] usbcore: registered new interface driver udl [ 1.481747] libphy: Fixed MDIO Bus: probed [ 1.486817] CAN device driver interface [ 1.543428] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.551175] davinci_mdio 4a101000.mdio: detected phy mask ffffffef [ 1.563452] libphy: 4a101000.mdio: probed [ 1.567601] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driver Atheros 8035 ethernet [ 1.577954] cpsw 4a100000.ethernet: Detected MACID = 98:5d:ad:2b:3d:68 [ 1.584859] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.591393] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.596742] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) [ 1.606447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.613167] ehci-platform: EHCI generic platform driver [ 1.618675] ehci-omap: OMAP-EHCI Host Controller driver [ 1.624477] usbcore: registered new interface driver usb-storage [ 1.633138] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 1.648884] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.662928] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 1.668412] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 1.676203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.683070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.690351] usb usb1: Product: MUSB HDRC host driver [ 1.695362] usb usb1: Manufacturer: Linux 4.14.108-ti-r102 musb-hcd [ 1.701679] usb usb1: SerialNumber: musb-hdrc.1 [ 1.707036] hub 1-0:1.0: USB hub found [ 1.710981] hub 1-0:1.0: 1 port detected [ 1.725741] omap_rtc 44e3e000.rtc: registered as rtc0 [ 1.731897] i2c /dev entries driver [ 1.735836] Driver for 1-wire Dallas network protocol. [ 1.743483] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.750894] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.760128] cpu cpu0: "syscon" is missing, cannot use OPPv2 table. [ 1.766494] cpuidle: enable-method property 'ti,am3352' found operations [ 1.773800] sdhci: Secure Digital Host Controller Interface driver [ 1.780067] sdhci: Copyright(c) Pierre Ossman [ 1.784922] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.862654] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.871133] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.878565] ledtrig-cpu: registered to indicate activity on CPUs [ 1.884894] mmc0: new high speed SDHC card at address 1234 [ 1.891487] mmcblk0: mmc0:1234 SA08G 7.21 GiB [ 1.896547] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 1.903859] omap-aes 53500000.aes: will run requests pump with realtime priority [ 1.912636] mmcblk0: p1 [ 1.921431] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 1.933956] hidraw: raw HID events driver (C) Jiri Kosina [ 1.940435] usbcore: registered new interface driver usbhid [ 1.946222] usbhid: USB HID core driver [ 1.950657] remoteproc remoteproc0: wkup_m3 is available [ 1.957686] ti_emif_sram 4c000000.emif: Unable to get sram pool for ocmcram data [ 1.970662] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information. [ 1.979568] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 1.990370] NET: Registered protocol family 10 [ 1.995882] mmc1: switch to bus width 8 failed [ 2.001605] mmc1: new high speed MMC card at address 0001 [ 2.007689] Segment Routing with IPv6 [ 2.012437] mip6: Mobile IPv6 [ 2.015579] mmcblk1: mmc1:0001 004GA0 3.69 GiB [ 2.020215] NET: Registered protocol family 17 [ 2.025467] mmcblk1boot0: mmc1:0001 004GA0 partition 1 2.00 MiB [ 2.031538] can: controller area network core (rev 20170425 abi 9) [ 2.038199] mmcblk1boot1: mmc1:0001 004GA0 partition 2 2.00 MiB [ 2.044337] NET: Registered protocol family 29 [ 2.049237] mmcblk1rpmb: mmc1:0001 004GA0 partition 3 512 KiB [ 2.055174] Key type dns_resolver registered [ 2.059948] mpls_gso: MPLS GSO support [ 2.064426] omap_voltage_late_init: Voltage driver support not added [ 2.071065] mmcblk1: p1 [ 2.075062] PM: Cannot get wkup_m3_ipc handle [ 2.081346] ThumbEE CPU extension supported. [ 2.085817] Registering SWP/SWPB emulation handler [ 2.091779] registered taskstats version 1 [ 2.096081] zswap: loaded using pool lzo/zbud [ 2.102991] Btrfs loaded, crc32c=crc32c-generic [ 2.107762] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.114178] ima: Allocated hash algorithm: sha256 [ 2.151376] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 2.171951] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 2.183514] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.189422] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.197794] tda998x 0-0070: Error -121 writing to cec:0xff [ 2.203474] tda998x 0-0070: set_page 000a err -121 [ 2.267422] tda998x 0-0070: set_page 000a err -121 [ 2.303658] usb 1-1: New USB device found, idVendor=0424, idProduct=2534 [ 2.310431] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.318407] hub 1-1:1.0: USB hub found [ 2.322317] hub 1-1:1.0: 4 ports detected [ 2.331437] tda998x 0-0070: set_page 0001 err -121 [ 2.336367] tda998x 0-0070: set_page 0001 err -121 [ 2.341268] tda998x 0-0070: set_page 0200 err -121 [ 2.346177] tda998x 0-0070: set_page 0201 err -121 [ 2.351080] tda998x 0-0070: set_page 0202 err -121 [ 2.355983] tda998x 0-0070: set_page 0203 err -121 [ 2.360885] tda998x 0-0070: set_page 0204 err -121 [ 2.365786] tda998x 0-0070: set_page 0205 err -121 [ 2.370687] tda998x 0-0070: set_page 020e err -121 [ 2.375586] tda998x 0-0070: set_page 0211 err -121 [ 2.380486] tda998x 0-0070: set_page 0207 err -121 [ 2.385384] tda998x 0-0070: set_page 0208 err -121 [ 2.390282] tda998x 0-0070: set_page 0209 err -121 [ 2.395181] tda998x 0-0070: set_page 020a err -121 [ 2.400088] tda998x 0-0070: set_page 0206 err -121 [ 2.404986] tda998x 0-0070: set_page 0027 err -121 [ 2.409886] tda998x 0-0070: set_page 0000 err -121 [ 2.414787] tda998x 0-0070: set_page 0002 err -121 [ 2.419834] tilcdc 4830e000.lcdc: failed to bind 0-0070 (ops tda998x_ops): -6 [ 2.427406] tilcdc 4830e000.lcdc: master bind failed: -6 [ 2.433712] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.444413] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.451877] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.459252] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.466626] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.473671] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.481004] remoteproc remoteproc0: powering up wkup_m3 [ 2.486396] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 2.494856] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 2.494873] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 [ 2.512244] bone_capemgr bone_capemgr: Invalid board signature 'ffffffff' [ 2.519142] bone_capemgr bone_capemgr: Failed to scan baseboard eeprom [ 2.526932] pm33xx pm33xx: PM: am33xx_pm_alloc_sram: Unable to get sram pool for ocmcram [ 2.536239] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.545029] of_cfs_init [ 2.547680] of_cfs_init: OK [ 2.551129] ALSA device list: [ 2.554198] No soundcards found. [ 2.561399] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 2.568961] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 14.846501] EXT4-fs (mmcblk0p1): recovery complete [ 14.999401] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 15.007664] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 15.022229] devtmpfs: mounted [ 15.031759] Freeing unused kernel memory: 1024K [ 15.405505] systemd[1]: System time before build time, advancing clock. [ 15.504071] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.524763] random: systemd: uninitialized urandom read (16 bytes read) [ 15.535122] random: systemd: uninitialized urandom read (16 bytes read) [ 15.556967] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 15.576083] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 15.601005] systemd[1]: Set hostname to . [ 15.821010] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) [ 16.230853] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 16.248153] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 16.271716] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 16.289149] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab��…rmats File System Automount Point. [ 16.316055] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 16.332141] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 16.357043] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Journal Audit Socket. [ OK ] Reached target Paths. [ OK ] Reached target Remote File Systems. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Slices. [ OK ] Listening on Journal Socket. Starting Journal Service... Starting Create list of required st��…ce nodes for the current kernel... [ OK ] Listening on udev Control Socket. [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... Mounting Debug File System... Starting Load Kernel Modules... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Create list of required sta��…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check Daemon to report status. Mounting FUSE Control File System... Starting Apply Kernel Variables... Mounting Configuration File System... Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Configuration File System. [ OK ] Started Journal Service. [ OK ] Started File System Check on Root Device. [ OK ] Started Apply Kernel Variables. Starting Remount Root and Kernel File Systems... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 17.557041] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ 18.072359] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 19.578654] net eth0: initializing cpsw version 1.12 (0) [ 19.677357] Atheros 8035 ethernet 4a101000.mdio:04: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:04, irq=POLL) [ 19.735153] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Connection service... [ OK ] Started Regular background program processing daemon. Starting Login Service... Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting DUN service... Starting System Logging Service... Starting Avahi mDNS/DNS-SD Stack... Starting Generic Board Startup... Starting Telephony service... Starting LSB: Start busybox udhcpd at boot time... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started DUN service. [ OK ] Started Connection service. [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. [ 22.079983] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 22.327278] Bluetooth: Core ver 2.22 [ 22.359748] NET: Registered protocol family 31 [ 22.387594] Bluetooth: HCI device and connection manager initialized [ 22.437723] Bluetooth: HCI socket layer initialized [ 22.459669] Bluetooth: L2CAP socket layer initialized [ 22.491899] Bluetooth: SCO socket layer initialized [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting Permit User Sessions... Starting A high performance web server and a reverse proxy server... Starting OpenBSD Secure Shell server... [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. Starting LSB: set CPUFreq kernel parameters... [ 24.008854] net eth0: initializing cpsw version 1.12 (0) [ 24.161326] Atheros 8035 ethernet 4a101000.mdio:04: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:04, irq=POLL) Starting Hostname Service... [ 24.287127] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting WPA supplicant... [ OK ] Started WPA supplicant. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Hostname Service. [ 25.507892] using random self ethernet address [ 25.516920] using random host ethernet address [ 25.606671] using random self ethernet address [ 25.617012] using random host ethernet address [ 25.842789] usb0: HOST MAC 98:5d:ad:2b:3d:69 [ 25.871305] usb0: MAC 98:5d:ad:2b:3d:6a [ 25.895889] usb1: HOST MAC 98:5d:ad:2b:3d:6c [ 25.915777] usb1: MAC 98:5d:ad:2b:3d:6d [ OK ] Started A high performance web server and a reverse proxy server. [ OK ] Started Generic Board Startup. [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. [ 26.354867] configfs-gadget gadget: high-speed config #1: c [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ 26.728151] bmp280 0-0076: 0-0076 supply vddd not found, using dummy regulator [ 26.816722] bmp280 0-0076: 0-0076 supply vdda not found, using dummy regulator [ 26.889106] bmp280: probe of 0-0076 failed with error -121 [ 26.954842] inv-mpu6050-i2c 0-0068: mounting matrix not found: using identity... [ 27.020048] inv-mpu6050-i2c: probe of 0-0068 failed with error -121