Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.141-bone27 (alex@alex-Inspiron-5521) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 PREEMPT Tue Sep 3 21:00:45 CEST 2019 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Octavo OSD335x-SM Reference Design [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9d000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0x8d/0x36e with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 453024K/524288K available (9216K kernel code, 986K rwdata, 4036K rodata, 1024K init, 347K bss, 22112K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0f00000 - 0xc1000000 (1024 kB) [ 0.000000] .data : 0xc1000000 - 0xc10f6acc ( 987 kB) [ 0.000000] .bss : 0xc1100154 - 0xc1156fb4 ( 348 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 39882 entries in 78 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000028] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000039] OMAP clocksource: timer1 at 24000000 Hz [ 0.000433] timer_probe: no matching timers found [ 0.000606] Console: colour dummy device 80x30 [ 0.000632] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000638] This ensures that you still see kernel messages. Please [ 0.000644] update your kernel commandline. [ 0.000666] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.047169] pid_max: default: 32768 minimum: 301 [ 0.047407] Security Framework initialized [ 0.047421] Yama: becoming mindful. [ 0.047495] AppArmor: AppArmor initialized [ 0.047564] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.047577] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.048363] CPU: Testing write buffer coherency: ok [ 0.048419] CPU0: Spectre v2: using BPIALL workaround [ 0.049081] Setting up static identity map for 0x80100000 - 0x80100054 [ 0.049216] Hierarchical SRCU implementation. [ 0.052206] EFI services will not be available. [ 0.053630] devtmpfs: initialized [ 0.064598] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.064910] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064930] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.068487] xor: measuring software checksum speed [ 0.107199] arm4regs : 1220.000 MB/sec [ 0.147169] 8regs : 878.000 MB/sec [ 0.187171] 32regs : 1055.000 MB/sec [ 0.227168] neon : 1666.000 MB/sec [ 0.227176] xor: using function: neon (1666.000 MB/sec) [ 0.227192] pinctrl core: initialized pinctrl subsystem [ 0.227803] DMI not present or invalid. [ 0.228136] NET: Registered protocol family 16 [ 0.230351] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.245953] omap_hwmod: debugss: _wait_target_disable failed [ 0.286058] cpuidle: using governor menu [ 0.290022] OMAP GPIO hardware version 0.1 [ 0.297443] omap_gpio ocp:imu_int_en: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/imu_interrupt, deferring probe [ 0.298944] No ATAGs? [ 0.298954] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.308591] raid6: using algorithm neonx8 gen() 0 MB/s [ 0.308607] raid6: .... xor() 0 MB/s, rmw enabled [ 0.308617] raid6: using neon recovery algorithm [ 0.314061] edma 49000000.edma: TI EDMA DMA engine driver [ 0.316002] SCSI subsystem initialized [ 0.316511] usbcore: registered new interface driver usbfs [ 0.316572] usbcore: registered new interface driver hub [ 0.316646] usbcore: registered new device driver usb [ 0.317079] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.317129] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.317225] media: Linux media interface: v0.10 [ 0.317260] Linux video capture interface: v2.00 [ 0.317308] pps_core: LinuxPPS API ver. 1 registered [ 0.317315] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.317336] PTP clock support registered [ 0.317436] dmi: Firmware registration failed. [ 0.317879] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.318425] Advanced Linux Sound Architecture Driver Initialized. [ 0.318906] NetLabel: Initializing [ 0.318918] NetLabel: domain hash size = 128 [ 0.318925] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.318994] NetLabel: unlabeled traffic allowed by default [ 0.319646] clocksource: Switched to clocksource timer1 [ 0.422723] VFS: Disk quotas dquot_6.6.0 [ 0.422810] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.423314] AppArmor: AppArmor Filesystem Enabled [ 0.431828] NET: Registered protocol family 2 [ 0.432521] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.432564] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.432602] TCP: Hash tables configured (established 4096 bind 4096) [ 0.432708] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.432725] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.432886] NET: Registered protocol family 1 [ 0.433427] RPC: Registered named UNIX socket transport module. [ 0.433439] RPC: Registered udp transport module. [ 0.433445] RPC: Registered tcp transport module. [ 0.433452] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.434238] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.434331] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.436278] audit: initializing netlink subsys (disabled) [ 0.437155] audit: type=2000 audit(0.436:1): state=initialized audit_enabled=0 res=1 [ 0.437261] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.441741] zbud: loaded [ 0.444211] NFS: Registering the id_resolver key type [ 0.444255] Key type id_resolver registered [ 0.444263] Key type id_legacy registered [ 0.444280] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.444535] fuse init (API version 7.26) [ 0.451355] Key type asymmetric registered [ 0.451374] Asymmetric key parser 'x509' registered [ 0.451481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.451759] io scheduler noop registered [ 0.451770] io scheduler deadline registered [ 0.452050] io scheduler cfq registered (default) [ 0.452061] io scheduler mq-deadline registered [ 0.452777] pinctrl-single 44e10800.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.453072] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.455036] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 0.456231] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.458736] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.254857] console [ttyS0] enabled [ 1.260493] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.266761] random: fast init done [ 1.270277] random: crng init done [ 1.274430] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 1.281628] usbcore: registered new interface driver udl [ 1.291136] libphy: Fixed MDIO Bus: probed [ 1.296040] CAN device driver interface [ 1.300773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.307384] ehci-platform: EHCI generic platform driver [ 1.312797] ehci-omap: OMAP-EHCI Host Controller driver [ 1.318218] usbcore: registered new interface driver usb-storage [ 1.324328] usbcore: registered new interface driver ums-alauda [ 1.330327] usbcore: registered new interface driver ums-jumpshot [ 1.336489] usbcore: registered new interface driver ums-karma [ 1.342386] usbcore: registered new interface driver ums-onetouch [ 1.348551] usbcore: registered new interface driver ums-sddr09 [ 1.354535] usbcore: registered new interface driver ums-sddr55 [ 1.360587] usbcore: registered new interface driver usbserial [ 1.366491] usbcore: registered new interface driver usbserial_generic [ 1.373091] usbserial: USB Serial support registered for generic [ 1.380941] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 1.395453] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.408654] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 1.414043] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 1.421694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.428539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.435807] usb usb1: Product: MUSB HDRC host driver [ 1.440804] usb usb1: Manufacturer: Linux 4.14.141-bone27 musb-hcd [ 1.447023] usb usb1: SerialNumber: musb-hdrc.1 [ 1.452170] hub 1-0:1.0: USB hub found [ 1.456053] hub 1-0:1.0: 1 port detected [ 1.465993] usbcore: registered new device driver usbip-host [ 1.473743] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.481528] i2c /dev entries driver [ 1.485343] Driver for 1-wire Dallas network protocol. [ 1.492068] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.499321] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.508035] cpu cpu0: "syscon" is missing, cannot use OPPv2 table. [ 1.514321] /cpus/cpu@0: unsupported enable-method property: ti,am3352 [ 1.520894] CPUidle arm: CPU 0 failed to init idle CPU ops [ 1.527015] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.606511] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.615730] ledtrig-cpu: registered to indicate activity on CPUs [ 1.622319] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 1.628271] mmc0: new high speed SDHC card at address 0001 [ 1.634552] mmcblk0: mmc0:0001 00000 3.79 GiB [ 1.639151] omap-aes 53500000.aes: will run requests pump with realtime priority [ 1.650860] mmcblk0: p1 [ 1.656146] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 1.666525] hidraw: raw HID events driver (C) Jiri Kosina [ 1.672606] usbcore: registered new interface driver usbhid [ 1.678313] usbhid: USB HID core driver [ 1.682587] remoteproc remoteproc0: wkup_m3 is available [ 1.692084] NET: Registered protocol family 26 [ 1.702833] mmc1: switch to bus width 8 failed [ 1.712137] mmc1: new high speed MMC card at address 0001 [ 1.724180] mmcblk1: mmc1:0001 004GA0 3.69 GiB [ 1.735840] mmcblk1boot0: mmc1:0001 004GA0 partition 1 2.00 MiB [ 1.747813] mmcblk1boot1: mmc1:0001 004GA0 partition 2 2.00 MiB [ 1.760242] mmcblk1rpmb: mmc1:0001 004GA0 partition 3 512 KiB [ 1.802078] wireguard: chacha20 self-tests: pass [ 1.841288] wireguard: poly1305 self-tests: pass [ 1.848001] wireguard: chacha20poly1305 self-tests: pass [ 1.856068] wireguard: blake2s self-tests: pass [ 1.887680] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 2.047888] usb 1-1: New USB device found, idVendor=0424, idProduct=2534 [ 2.059656] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.076268] hub 1-1:1.0: USB hub found [ 2.083720] hub 1-1:1.0: 4 ports detected [ 2.148967] wireguard: curve25519 self-tests: pass [ 2.153989] wireguard: allowedips self-tests: pass [ 2.161903] wireguard: nonce counter self-tests: pass [ 2.525426] wireguard: ratelimiter self-tests: pass [ 2.530555] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information. [ 2.539069] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 2.549407] NET: Registered protocol family 10 [ 2.555083] Segment Routing with IPv6 [ 2.558926] mip6: Mobile IPv6 [ 2.561933] NET: Registered protocol family 17 [ 2.566419] can: controller area network core (rev 20170425 abi 9) [ 2.572708] NET: Registered protocol family 29 [ 2.577234] 8021q: 802.1Q VLAN Support v1.8 [ 2.582714] DCCP: Activated CCID 2 (TCP-like) [ 2.587138] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 2.593611] sctp: Hash tables configured (bind 1024/1024) [ 2.599801] NET: Registered protocol family 21 [ 2.604410] Registered RDS/tcp transport [ 2.608403] Key type dns_resolver registered [ 2.612706] mpls_gso: MPLS GSO support [ 2.616644] omap_voltage_late_init: Voltage driver support not added [ 2.623047] ThumbEE CPU extension supported. [ 2.627358] Registering SWP/SWPB emulation handler [ 2.632887] registered taskstats version 1 [ 2.637132] zswap: loaded using pool lzo/zbud [ 2.643299] Btrfs loaded, crc32c=crc32c-generic [ 2.647987] AppArmor: AppArmor sha1 policy hashing enabled [ 2.653567] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.659909] ima: Allocated hash algorithm: sha256 [ 2.668874] omap_gpio ocp:imu_int_en: can't get irq resource ret=-6 [ 2.709766] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 2.721026] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.726744] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.734810] tda998x 0-0070: Error -121 writing to cec:0xff [ 2.740427] tda998x 0-0070: set_page 000a err -121 [ 2.803723] tda998x 0-0070: set_page 000a err -121 [ 2.867718] tda998x 0-0070: set_page 0001 err -121 [ 2.872599] tda998x 0-0070: set_page 0001 err -121 [ 2.877477] tda998x 0-0070: set_page 0200 err -121 [ 2.882354] tda998x 0-0070: set_page 0201 err -121 [ 2.887232] tda998x 0-0070: set_page 0202 err -121 [ 2.892110] tda998x 0-0070: set_page 0203 err -121 [ 2.896987] tda998x 0-0070: set_page 0204 err -121 [ 2.901864] tda998x 0-0070: set_page 0205 err -121 [ 2.906741] tda998x 0-0070: set_page 020e err -121 [ 2.911614] tda998x 0-0070: set_page 0211 err -121 [ 2.916498] tda998x 0-0070: set_page 0207 err -121 [ 2.921375] tda998x 0-0070: set_page 0208 err -121 [ 2.926251] tda998x 0-0070: set_page 0209 err -121 [ 2.931128] tda998x 0-0070: set_page 020a err -121 [ 2.936006] tda998x 0-0070: set_page 0206 err -121 [ 2.940883] tda998x 0-0070: set_page 0027 err -121 [ 2.945760] tda998x 0-0070: set_page 0000 err -121 [ 2.950637] tda998x 0-0070: set_page 0002 err -121 [ 2.955597] tilcdc 4830e000.lcdc: failed to bind 0-0070 (ops tda998x_ops): -6 [ 2.962960] tilcdc 4830e000.lcdc: master bind failed: -6 [ 2.968968] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.976048] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.983288] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.990515] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.997702] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 3.004688] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 3.011222] remoteproc remoteproc0: powering up wkup_m3 [ 3.016558] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 3.024957] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 3.031521] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 [ 3.042957] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,OS00,������������' [ 3.050267] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4 [ 3.086237] bone_capemgr bone_capemgr: slot #0: No cape found [ 3.121627] bone_capemgr bone_capemgr: slot #1: No cape found [ 3.153714] bone_capemgr bone_capemgr: slot #2: No cape found [ 3.185810] bone_capemgr bone_capemgr: slot #3: No cape found [ 3.191664] bone_capemgr bone_capemgr: initialized OK. [ 3.197972] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.206726] of_cfs_init [ 3.209283] of_cfs_init: OK [ 3.212666] ALSA device list: [ 3.215693] No soundcards found. [ 3.221725] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 3.229180] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 5.567252] EXT4-fs (mmcblk0p1): recovery complete [ 5.965335] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.973566] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.989454] devtmpfs: mounted [ 5.995061] Freeing unused kernel memory: 1024K [ 6.368412] systemd[1]: System time before build time, advancing clock. [ 6.458953] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.498870] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 6.517745] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 6.536601] systemd[1]: Set hostname to . [ 7.074516] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 7.101318] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 7.128271] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 7.152214] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.168148] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.184402] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 7.200184] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Swap. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Remote File Systems. [ OK ] Created slice System Slice. [ OK ] Created slice system-getty.slice. [ OK ] Reached target Slices. Starting File System Check on Root Device... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Mounting POSIX Message Queue File System... Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Syslog Socket. Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... Mounting Debug File System... [ OK ] Reached target Paths. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started File System Check on Root Device. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... Mounting Configuration File System... Starting Apply Kernel Variables... Mounting FUSE Control File System... Starting Remount Root and Kernel File Systems... [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Journal Service. [ 8.116741] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ 8.532078] systemd-journald[120]: Received request to flush runtime journal from PID 1 [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting DUN service... Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting Generic Board Startup... [ OK ] Started D-Bus System Message Bus. [ OK ] Started DUN service. Starting Connection service... Starting Telephony service... Starting Login Service... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting System Logging Service... [ OK ] Started Regular background program processing daemon. Starting LSB: Start busybox udhcpd at boot time... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started System Logging Service. [ OK ] Started Generic Board Startup. [ OK ] Started LSB: Start busybox udhcpd at boot time. [FAILED] Failed to start Raise network interfaces. See 'systemctl status networking.service' for details. [ OK ] Started Telephony service. [ OK ] Started Connection service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... [ 12.036359] Bluetooth: Core ver 2.22 [ 12.087581] NET: Registered protocol family 31 Starting OpenBSD Secure Shell server... [ 12.103444] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 12.127196] Bluetooth: HCI device and connection manager initialized [ 12.164223] Bluetooth: HCI socket layer initialized Starting A high performance web server and a reverse proxy server... [ 12.222501] Bluetooth: L2CAP socket layer initialized Starting Permit User Sessions... [ 12.279325] Bluetooth: SCO socket layer initialized [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. Starting WPA supplicant... [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. Starting Hostname Service... Starting LSB: set CPUFreq kernel parameters... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started WPA supplicant. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Hostname Service. [ OK ] Started A high performance web server and a reverse proxy server. [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ 14.773352] inv-mpu6050-i2c 0-0068: mounting matrix not found: using identity... [ 14.855157] inv-mpu6050-i2c: probe of 0-0068 failed with error -121 [ 14.934507] bmp280 0-0076: 0-0076 supply vddd not found, using dummy regulator [ 14.986292] bmp280 0-0076: 0-0076 supply vdda not found, using dummy regulator [ 15.070515] bmp280: probe of 0-0076 failed with error -121