U-Boot SPL 2019.07 (Mar 16 2020 - 23:54:49 +0000) Trying to boot from MMC1 U-Boot 2019.07 (Mar 16 2020 - 23:54:49 +0000) CPU : AM335X-GP rev 2.1 Model: Rose Point Navigation Systems Nemo 2 DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment not set. Validating first E-fuse MAC Net: Could not get PHY for ethernet@4a100000: addr 1 eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is 60:64:05:33:19:70 , eth1: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 466 bytes read in 3 ms (151.4 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... Running uenvcmd ... 6357656 bytes read in 411 ms (14.8 MiB/s) 37237 bytes read in 6 ms (5.9 MiB/s) bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff3000, end 8ffff174 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.79 (root@dc70982830b0) (gcc version 8.3.0 (Buildroot 2020.02-rc1)) #1 SMP Mon Mar 16 23:56:43 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Rose Point Navigation Systems Nemo 2 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x4a8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s38120 r0 d23320 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 478916K/522240K available (9216K kernel code, 868K rwdata, 2380K rodata, 1024K init, 7479K bss, 26940K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 869 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7480 kB) [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000052] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000111] OMAP clocksource: timer1 at 24000000 Hz [ 0.000641] timer_probe: no matching timers found [ 0.001565] Console: colour dummy device 80x30 [ 0.001629] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001647] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001663] ... MAX_LOCK_DEPTH: 48 [ 0.001678] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001694] ... CLASSHASH_SIZE: 4096 [ 0.001709] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001725] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001740] ... CHAINHASH_SIZE: 32768 [ 0.001756] memory used by lock dependency info: 4655 kB [ 0.001772] per task-struct memory footprint: 1536 bytes [ 0.001859] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078623] pid_max: default: 32768 minimum: 301 [ 0.079076] Security Framework initialized [ 0.079218] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079243] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082478] CPU: Testing write buffer coherency: ok [ 0.082668] CPU0: Spectre v2: using BPIALL workaround [ 0.084151] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.086584] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.087254] rcu: Hierarchical SRCU implementation. [ 0.089382] smp: Bringing up secondary CPUs ... [ 0.089414] smp: Brought up 1 node, 1 CPU [ 0.089435] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.089453] CPU: All CPU(s) started in SVC mode. [ 0.093495] devtmpfs: initialized [ 0.121827] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.122658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.122731] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.124461] xor: measuring software checksum speed [ 0.218575] arm4regs : 1214.000 MB/sec [ 0.318569] 8regs : 1088.800 MB/sec [ 0.418568] 32regs : 1086.400 MB/sec [ 0.518568] neon : 1577.200 MB/sec [ 0.518588] xor: using function: neon (1577.200 MB/sec) [ 0.518624] pinctrl core: initialized pinctrl subsystem [ 0.523812] NET: Registered protocol family 16 [ 0.531158] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.636405] audit: initializing netlink subsys (disabled) [ 0.639426] cpuidle: using governor menu [ 0.654454] audit: type=2000 audit(0.630:1): state=initialized audit_enabled=0 res=1 [ 0.655875] OMAP GPIO hardware version 0.1 [ 0.684252] No ATAGs? [ 0.684277] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.707621] cryptd: max_cpu_qlen set to 1000 [ 0.724744] edma 49000000.edma: TI EDMA DMA engine driver [ 0.731084] SCSI subsystem initialized [ 0.732773] usbcore: registered new interface driver usbfs [ 0.732980] usbcore: registered new interface driver hub [ 0.733159] usbcore: registered new device driver usb [ 0.734635] pps_core: LinuxPPS API ver. 1 registered [ 0.734659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.734716] PTP clock support registered [ 0.736061] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.740891] clocksource: Switched to clocksource timer1 [ 0.916996] VFS: Disk quotas dquot_6.6.0 [ 0.917209] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.945206] NET: Registered protocol family 2 [ 0.947498] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) [ 0.947594] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.947695] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.948240] TCP: Hash tables configured (established 4096 bind 4096) [ 0.948640] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.948753] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.949203] NET: Registered protocol family 1 [ 0.952459] RPC: Registered named UNIX socket transport module. [ 0.952545] RPC: Registered udp transport module. [ 0.952565] RPC: Registered tcp transport module. [ 0.952583] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.955951] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.967114] Initialise system trusted keyrings [ 0.968100] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.971962] NFS: Registering the id_resolver key type [ 0.972139] Key type id_resolver registered [ 0.972212] Key type id_legacy registered [ 0.972384] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.991505] Key type asymmetric registered [ 0.991759] Asymmetric key parser 'x509' registered [ 0.991947] io scheduler noop registered [ 0.991974] io scheduler deadline registered [ 0.992179] io scheduler cfq registered (default) [ 0.992207] io scheduler mq-deadline registered [ 0.992227] io scheduler kyber registered [ 0.995740] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 1.003346] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.007316] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.021125] console [ttyS0] disabled [ 1.021648] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.743621] console [ttyS0] enabled [ 1.750218] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 31, base_baud = 3000000) is a 8250 [ 1.762066] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250 [ 1.773622] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 33, base_baud = 3000000) is a 8250 [ 1.785105] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 34, base_baud = 3000000) is a 8250 [ 1.798955] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.806655] random: fast init done [ 1.810432] random: crng init done [ 1.846276] brd: module loaded [ 1.877690] loop: module loaded [ 1.884743] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.895077] libphy: Fixed MDIO Bus: probed [ 1.899223] CAN device driver interface [ 1.905815] c_can_platform 481d0000.can: c_can_platform device registered (regs=fe15f122, irq=39) [ 1.990868] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.998626] davinci_mdio 4a101000.mdio: detected phy mask fffffffd [ 2.005687] MDIO: davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffd] [ 2.014705] libphy: 4a101000.mdio: probed [ 2.018773] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver TI DP83822 [ 2.028783] cpsw 4a100000.ethernet: Detected MACID = 60:64:05:33:19:6e [ 2.035944] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 2.042465] cpsw 4a100000.ethernet: ALE Table size 1024 [ 2.047800] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.061396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.067995] ehci-pci: EHCI PCI platform driver [ 2.072721] ehci-platform: EHCI generic platform driver [ 2.078417] ehci-omap: OMAP-EHCI Host Controller driver [ 2.084701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.091128] ohci-pci: OHCI PCI platform driver [ 2.095707] ohci-platform: OHCI generic platform driver [ 2.102059] usbcore: registered new interface driver usb-storage [ 2.108335] usbcore: registered new interface driver usbserial_generic [ 2.115410] usbserial: USB Serial support registered for generic [ 2.121975] usbcore: registered new interface driver ftdi_sio [ 2.127836] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.135354] usbcore: registered new interface driver pl2303 [ 2.141099] usbserial: USB Serial support registered for pl2303 [ 2.147123] usbcore: registered new interface driver usb_serial_simple [ 2.153824] usbserial: USB Serial support registered for carelink [ 2.160019] usbserial: USB Serial support registered for zio [ 2.165861] usbserial: USB Serial support registered for funsoft [ 2.172035] usbserial: USB Serial support registered for flashloader [ 2.178497] usbserial: USB Serial support registered for google [ 2.184581] usbserial: USB Serial support registered for libtransistor [ 2.191275] usbserial: USB Serial support registered for vivopay [ 2.197384] usbserial: USB Serial support registered for moto_modem [ 2.203814] usbserial: USB Serial support registered for motorola_tetra [ 2.210533] usbserial: USB Serial support registered for novatel_gps [ 2.217059] usbserial: USB Serial support registered for hp4x [ 2.222965] usbserial: USB Serial support registered for suunto [ 2.228986] usbserial: USB Serial support registered for siemens_mpi [ 2.239867] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.250821] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 [ 2.264757] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.275167] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 [ 2.304752] mousedev: PS/2 mouse device common for all mice [ 2.316447] omap_rtc 44e3e000.rtc: registered as rtc0 [ 2.323305] i2c /dev entries driver [ 2.331759] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.343394] sdhci: Secure Digital Host Controller Interface driver [ 2.349636] sdhci: Copyright(c) Pierre Ossman [ 2.357223] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 [ 2.392829] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 [ 2.424879] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.436220] ledtrig-cpu: registered to indicate activity on CPUs [ 2.446552] remoteproc remoteproc0: wkup_m3 is available [ 2.456726] oprofile: using arm/armv7 [ 2.461190] wireguard: WireGuard 0.0.20191012 loaded. See www.wireguard.com for information. [ 2.469693] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 2.480030] Initializing XFRM netlink socket [ 2.485056] NET: Registered protocol family 10 [ 2.494593] Segment Routing with IPv6 [ 2.498450] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.506741] NET: Registered protocol family 17 [ 2.511684] NET: Registered protocol family 15 [ 2.516172] can: controller area network core (rev 20170425 abi 9) [ 2.522705] NET: Registered protocol family 29 [ 2.527221] can: raw protocol (rev 20170425) [ 2.531762] can: broadcast manager protocol (rev 20170425 t) [ 2.537487] can: netlink gateway (rev 20170425) max_hops=1 [ 2.543236] can: isotp protocol (rev 20181217 alpha) [ 2.548635] NET: Registered protocol family 35 [ 2.553551] Key type dns_resolver registered [ 2.558026] ThumbEE CPU extension supported. [ 2.562469] Registering SWP/SWPB emulation handler [ 2.574591] omap_voltage_late_init: Voltage driver support not added [ 2.581519] sr_dev_init: Unknown instance smartreflex0 [ 2.587216] PM: Cannot get wkup_m3_ipc handle [ 2.591972] SmartReflex Class3 initialized [ 2.596693] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.607385] mmc0: new high speed SDHC card at address 0007 [ 2.615450] Loading compiled-in X.509 certificates [ 2.624137] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 2.687259] mmcblk0: p1 p2 [ 2.708571] mmc1: new high speed MMC card at address 0001 [ 2.717268] mmcblk1: mmc1:0001 W62704 3.56 GiB [ 2.723895] mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB [ 2.731548] mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB [ 2.740122] mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB, chardev (247:0) [ 2.784433] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.790261] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.800288] remoteproc remoteproc0: powering up wkup_m3 [ 2.822496] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 2.830317] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 [ 2.840360] remoteproc remoteproc0: request_firmware failed: -2 [ 2.846651] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed [ 2.853394] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 2.863309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.871967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.879239] usb usb1: Product: MUSB HDRC host driver [ 2.884325] usb usb1: Manufacturer: Linux 4.19.79 musb-hcd [ 2.889849] usb usb1: SerialNumber: musb-hdrc.1 [ 2.898127] hub 1-0:1.0: USB hub found [ 2.902928] hub 1-0:1.0: 1 port detected [ 2.913384] cpu cpu0: Linked as a consumer to regulator.3 [ 2.919397] cpu cpu0: Dropping the link to regulator.3 [ 2.927684] cpu cpu0: Linked as a consumer to regulator.3 [ 2.938077] PM: Cannot get wkup_m3_ipc handle [ 2.944067] PM: Cannot get wkup_m3_ipc handle [ 2.950531] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.959473] sr_init: No PMIC hook to init smartreflex ÿ[ 4.400010] EXT4-fs (mmcblk0p2): recovery complete [ 4.415711] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.424401] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 4.436251] devtmpfs: mounted [ 4.443741] Freeing unused kernel memory: 1024K [ 4.450172] Run /sbin/init as init process [ 4.615060] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Initializing random number generator: OK Saving random seed: OK Starting network: [ 5.337402] net eth0: initializing cpsw version 1.12 (0) [ 5.353212] TI DP83822 4a101000.mdio:01: attached PHY driver [TI DP83822] (mii_bus:phy_addr=4a101000.mdio:01, irq=POLL) [ 5.378045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc: started, v1.31.1 udhcpc: sending discover [ 8.483078] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 8.493122] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready udhcpc: sending discover udhcpc: sending select for 192.168.1.176 udhcpc: lease of 192.168.1.176 obtained, lease time 86400 deleting routers adding dns 192.168.1.1 OK Starting dhcpcd... DUID 00:01:00:01:00:00:01:c7:60:64:05:33:19:6e eth0: IAID 05:33:19:6e eth0: soliciting an IPv6 router eth0: rebinding lease of 192.168.1.179 eth0: probing address 192.168.1.179/24 eth0: leased 192.168.1.179 for 86400 seconds eth0: adding route to 192.168.1.0/24 eth0: adding default route via 192.168.1.1 forked to background, child pid 191 /etc/init.d/S93-am335x-pm-firmware-load: line 4: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading: nonexistent directory /etc/init.d/S93-am335x-pm-firmware-load: line 5: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data: nonexistent directory /etc/init.d/S93-am335x-pm-firmware-load: line 6: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading: nonexistent directory Welcome to Nemo2 buildroot login: root Password: # ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: gs Wake-on: gs SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes # ethtool -S eth0 NIC statistics: Good Rx Frames: 68 Broadcast Rx Frames: 45 Multicast Rx Frames: 18 Pause Rx Frames: 0 Rx CRC Errors: 0 Rx Align/Code Errors: 0 Oversize Rx Frames: 0 Rx Jabbers: 0 Undersize (Short) Rx Frames: 0 Rx Fragments: 0 Rx Octets: 8798 Good Tx Frames: 23 Broadcast Tx Frames: 8 Multicast Tx Frames: 12 Pause Tx Frames: 0 Deferred Tx Frames: 0 Collisions: 0 Single Collision Tx Frames: 0 Multiple Collision Tx Frames: 0 Excessive Collisions: 0 Late Collisions: 0 Tx Underrun: 0 Carrier Sense Errors: 0 Tx Octets: 2658 Rx + Tx 64 Octet Frames: 44 Rx + Tx 65-127 Octet Frames: 33 Rx + Tx 128-255 Octet Frames: 3 Rx + Tx 256-511 Octet Frames: 7 Rx + Tx 512-1023 Octet Frames: 4 Rx + Tx 1024-Up Octet Frames: 0 Net Octets: 11456 Rx Start of Frame Overruns: 0 Rx Middle of Frame Overruns: 0 Rx DMA Overruns: 0 Rx DMA chan 0: head_enqueue: 1 Rx DMA chan 0: tail_enqueue: 177 Rx DMA chan 0: pad_enqueue: 0 Rx DMA chan 0: misqueued: 0 Rx DMA chan 0: desc_alloc_fail: 0 Rx DMA chan 0: pad_alloc_fail: 0 Rx DMA chan 0: runt_receive_buf: 0 Rx DMA chan 0: runt_transmit_bu: 0 Rx DMA chan 0: empty_dequeue: 0 Rx DMA chan 0: busy_dequeue: 26 Rx DMA chan 0: good_dequeue: 50 Rx DMA chan 0: requeue: 0 Rx DMA chan 0: teardown_dequeue: 0 Tx DMA chan 0: head_enqueue: 23 Tx DMA chan 0: tail_enqueue: 0 Tx DMA chan 0: pad_enqueue: 0 Tx DMA chan 0: misqueued: 0 Tx DMA chan 0: desc_alloc_fail: 0 Tx DMA chan 0: pad_alloc_fail: 0 Tx DMA chan 0: runt_receive_buf: 0 Tx DMA chan 0: runt_transmit_bu: 8 Tx DMA chan 0: empty_dequeue: 23 Tx DMA chan 0: busy_dequeue: 0 Tx DMA chan 0: good_dequeue: 23 Tx DMA chan 0: requeue: 0 Tx DMA chan 0: teardown_dequeue: 0 #