þüýUÿ U-Boot SPL 2019.07 (Mar 16 2020 - 23:54:49 +0000) Trying to boot from MMC1 U-Boot 2019.07 (Mar 16 2020 - 23:54:49 +0000) CPU : AM335X-GP rev 2.1 Model: Rose Point Navigation Systems Nemo 2 DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment not set. Validating first E-fuse MAC Net: Could not get PHY for ethernet@4a100000: addr 1 eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is 60:64:05:33:19:70 , eth1: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 466 bytes read in 3 ms (151.4 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... Running uenvcmd ... 6357656 bytes read in 411 ms (14.8 MiB/s) 37237 bytes read in 6 ms (5.9 MiB/s) bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff3000, end 8ffff174 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.79 (root@dc70982830b0) (gcc version 8.3.0 (Buildroot 2020.02-rc1)) #1 SMP Mon Mar 16 23:56:43 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Rose Point Navigation Systems Nemo 2 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x4a8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s38120 r0 d23320 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 478916K/522240K available (9216K kernel code, 868K rwdata, 2380K rodata, 1024K init, 7479K bss, 26940K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 869 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7480 kB) [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000107] OMAP clocksource: timer1 at 24000000 Hz [ 0.000640] timer_probe: no matching timers found [ 0.001569] Console: colour dummy device 80x30 [ 0.001631] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001649] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001665] ... MAX_LOCK_DEPTH: 48 [ 0.001681] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001697] ... CLASSHASH_SIZE: 4096 [ 0.001712] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001728] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001743] ... CHAINHASH_SIZE: 32768 [ 0.001759] memory used by lock dependency info: 4655 kB [ 0.001775] per task-struct memory footprint: 1536 bytes [ 0.001862] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078575] pid_max: default: 32768 minimum: 301 [ 0.079027] Security Framework initialized [ 0.079175] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079199] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082469] CPU: Testing write buffer coherency: ok [ 0.082652] CPU0: Spectre v2: using BPIALL workaround [ 0.084149] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.086580] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.087245] rcu: Hierarchical SRCU implementation. [ 0.089396] smp: Bringing up secondary CPUs ... [ 0.089428] smp: Brought up 1 node, 1 CPU [ 0.089449] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.089466] CPU: All CPU(s) started in SVC mode. [ 0.093564] devtmpfs: initialized [ 0.121909] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.122728] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.122804] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.124525] xor: measuring software checksum speed [ 0.218579] arm4regs : 1214.000 MB/sec [ 0.318573] 8regs : 1088.800 MB/sec [ 0.418572] 32regs : 1086.400 MB/sec [ 0.518570] neon : 1577.200 MB/sec [ 0.518590] xor: using function: neon (1577.200 MB/sec) [ 0.518625] pinctrl core: initialized pinctrl subsystem [ 0.523817] NET: Registered protocol family 16 [ 0.531168] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.636422] audit: initializing netlink subsys (disabled) [ 0.639448] cpuidle: using governor menu [ 0.654455] audit: type=2000 audit(0.630:1): state=initialized audit_enabled=0 res=1 [ 0.655884] OMAP GPIO hardware version 0.1 [ 0.684247] No ATAGs? [ 0.684272] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.707662] cryptd: max_cpu_qlen set to 1000 [ 0.725032] edma 49000000.edma: TI EDMA DMA engine driver [ 0.731376] SCSI subsystem initialized [ 0.733270] usbcore: registered new interface driver usbfs [ 0.733482] usbcore: registered new interface driver hub [ 0.733655] usbcore: registered new device driver usb [ 0.735145] pps_core: LinuxPPS API ver. 1 registered [ 0.735170] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.735226] PTP clock support registered [ 0.736579] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.740993] clocksource: Switched to clocksource timer1 [ 0.917189] VFS: Disk quotas dquot_6.6.0 [ 0.917405] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.945357] NET: Registered protocol family 2 [ 0.947668] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) [ 0.947762] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.947862] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.948408] TCP: Hash tables configured (established 4096 bind 4096) [ 0.948819] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.948934] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.949384] NET: Registered protocol family 1 [ 0.952630] RPC: Registered named UNIX socket transport module. [ 0.952718] RPC: Registered udp transport module. [ 0.952738] RPC: Registered tcp transport module. [ 0.952756] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.956200] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.967369] Initialise system trusted keyrings [ 0.968343] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.972185] NFS: Registering the id_resolver key type [ 0.972358] Key type id_resolver registered [ 0.972429] Key type id_legacy registered [ 0.972605] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.992137] Key type asymmetric registered [ 0.992404] Asymmetric key parser 'x509' registered [ 0.992599] io scheduler noop registered [ 0.992627] io scheduler deadline registered [ 0.992830] io scheduler cfq registered (default) [ 0.992856] io scheduler mq-deadline registered [ 0.992876] io scheduler kyber registered [ 0.996368] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 1.003917] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.007717] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.021506] console [ttyS0] disabled [ 1.022024] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.744096] console [ttyS0] enabled [ 1.750706] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 31, base_baud = 3000000) is a 8250 [ 1.762533] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250 [ 1.774118] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 33, base_baud = 3000000) is a 8250 [ 1.785587] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 34, base_baud = 3000000) is a 8250 [ 1.799439] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.807136] random: fast init done [ 1.811095] random: crng init done [ 1.846875] brd: module loaded [ 1.878128] loop: module loaded [ 1.885166] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.895493] libphy: Fixed MDIO Bus: probed [ 1.899640] CAN device driver interface [ 1.906219] c_can_platform 481d0000.can: c_can_platform device registered (regs=6f080d91, irq=39) [ 1.990971] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.998731] davinci_mdio 4a101000.mdio: detected phy mask fffffffd [ 2.005789] MDIO: davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffd] [ 2.014813] libphy: 4a101000.mdio: probed [ 2.018880] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver TI DP83822 [ 2.028893] cpsw 4a100000.ethernet: Detected MACID = 60:64:05:33:19:6e [ 2.036050] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 2.042573] cpsw 4a100000.ethernet: ALE Table size 1024 [ 2.047904] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.061511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.068107] ehci-pci: EHCI PCI platform driver [ 2.072830] ehci-platform: EHCI generic platform driver [ 2.078523] ehci-omap: OMAP-EHCI Host Controller driver [ 2.084775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.091200] ohci-pci: OHCI PCI platform driver [ 2.095784] ohci-platform: OHCI generic platform driver [ 2.102128] usbcore: registered new interface driver usb-storage [ 2.108434] usbcore: registered new interface driver usbserial_generic [ 2.115511] usbserial: USB Serial support registered for generic [ 2.122083] usbcore: registered new interface driver ftdi_sio [ 2.127940] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.135460] usbcore: registered new interface driver pl2303 [ 2.141204] usbserial: USB Serial support registered for pl2303 [ 2.147228] usbcore: registered new interface driver usb_serial_simple [ 2.153927] usbserial: USB Serial support registered for carelink [ 2.160123] usbserial: USB Serial support registered for zio [ 2.165964] usbserial: USB Serial support registered for funsoft [ 2.172138] usbserial: USB Serial support registered for flashloader [ 2.178597] usbserial: USB Serial support registered for google [ 2.184678] usbserial: USB Serial support registered for libtransistor [ 2.191369] usbserial: USB Serial support registered for vivopay [ 2.197476] usbserial: USB Serial support registered for moto_modem [ 2.203908] usbserial: USB Serial support registered for motorola_tetra [ 2.210627] usbserial: USB Serial support registered for novatel_gps [ 2.217155] usbserial: USB Serial support registered for hp4x [ 2.223065] usbserial: USB Serial support registered for suunto [ 2.229086] usbserial: USB Serial support registered for siemens_mpi [ 2.239979] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.250945] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 [ 2.264938] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.275353] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 [ 2.304991] mousedev: PS/2 mouse device common for all mice [ 2.316669] omap_rtc 44e3e000.rtc: registered as rtc0 [ 2.323532] i2c /dev entries driver [ 2.331978] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.343620] sdhci: Secure Digital Host Controller Interface driver [ 2.349862] sdhci: Copyright(c) Pierre Ossman [ 2.357443] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 [ 2.392956] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 [ 2.424748] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.436130] ledtrig-cpu: registered to indicate activity on CPUs [ 2.446541] remoteproc remoteproc0: wkup_m3 is available [ 2.456755] oprofile: using arm/armv7 [ 2.461214] wireguard: WireGuard 0.0.20191012 loaded. See www.wireguard.com for information. [ 2.469720] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 2.480043] Initializing XFRM netlink socket [ 2.485055] NET: Registered protocol family 10 [ 2.494623] Segment Routing with IPv6 [ 2.498480] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.506767] NET: Registered protocol family 17 [ 2.511705] NET: Registered protocol family 15 [ 2.516193] can: controller area network core (rev 20170425 abi 9) [ 2.522735] NET: Registered protocol family 29 [ 2.527252] can: raw protocol (rev 20170425) [ 2.531799] can: broadcast manager protocol (rev 20170425 t) [ 2.537529] can: netlink gateway (rev 20170425) max_hops=1 [ 2.543289] can: isotp protocol (rev 20181217 alpha) [ 2.548702] NET: Registered protocol family 35 [ 2.553633] Key type dns_resolver registered [ 2.558108] ThumbEE CPU extension supported. [ 2.562547] Registering SWP/SWPB emulation handler [ 2.574723] omap_voltage_late_init: Voltage driver support not added [ 2.581540] sr_dev_init: Unknown instance smartreflex0 [ 2.587235] PM: Cannot get wkup_m3_ipc handle [ 2.591998] SmartReflex Class3 initialized [ 2.596724] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.607537] mmc0: new high speed SDHC card at address 0007 [ 2.615565] Loading compiled-in X.509 certificates [ 2.624134] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 2.687400] mmcblk0: p1 p2 [ 2.708726] mmc1: new high speed MMC card at address 0001 [ 2.717492] mmcblk1: mmc1:0001 W62704 3.56 GiB [ 2.724013] mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB [ 2.731712] mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB [ 2.740293] mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB, chardev (247:0) [ 2.784734] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.790573] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.800604] remoteproc remoteproc0: powering up wkup_m3 [ 2.822841] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 2.830660] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 [ 2.840708] remoteproc remoteproc0: request_firmware failed: -2 [ 2.847000] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed [ 2.853745] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 2.863691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.872356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.879629] usb usb1: Product: MUSB HDRC host driver [ 2.884720] usb usb1: Manufacturer: Linux 4.19.79 musb-hcd [ 2.890243] usb usb1: SerialNumber: musb-hdrc.1 [ 2.898529] hub 1-0:1.0: USB hub found [ 2.903321] hub 1-0:1.0: 1 port detected [ 2.913812] cpu cpu0: Linked as a consumer to regulator.3 [ 2.919827] cpu cpu0: Dropping the link to regulator.3 [ 2.928152] cpu cpu0: Linked as a consumer to regulator.3 [ 2.938558] PM: Cannot get wkup_m3_ipc handle [ 2.944577] PM: Cannot get wkup_m3_ipc handle [ 2.951349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.960038] sr_init: No PMIC hook to init smartreflex [ 4.337335] EXT4-fs (mmcblk0p2): recovery complete [ 4.349194] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.357714] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 4.367506] devtmpfs: mounted [ 4.372880] Freeing unused kernel memory: 1024K [ 4.378451] Run /sbin/init as init process [ 4.532319] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Initializing random number generator: OK Saving random seed: OK Starting network: [ 5.240277] net eth0: initializing cpsw version 1.12 (0) [ 5.255875] TI DP83822 4a101000.mdio:01: attached PHY driver [TI DP83822] (mii_bus:phy_addr=4a101000.mdio:01, irq=POLL) [ 5.277573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc: started, v1.31.1 udhcpc: sending discover [ 8.403197] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx udhcpc: sending discover[ 8.415389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready udhcpc: sending discover udhcpc: sending select for 192.168.1.176 udhcpc: lease of 192.168.1.176 obtained, lease time 86400 deleting routers adding dns 192.168.1.1 OK Starting dhcpcd... DUID 00:01:00:01:00:00:01:c7:60:64:05:33:19:6e eth0: IAID 05:33:19:6e eth0: soliciting an IPv6 router eth0: rebinding lease of 192.168.1.179 eth0: probing address 192.168.1.179/24 eth0: leased 192.168.1.179 for 86400 seconds eth0: adding route to 192.168.1.0/24 eth0: adding default route via 192.168.1.1 forked to background, child pid 191 /etc/init.d/S93-am335x-pm-firmware-load: line 4: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading: nonexistent directory /etc/init.d/S93-am335x-pm-firmware-load: line 5: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data: nonexistent directory /etc/init.d/S93-am335x-pm-firmware-load: line 6: can't create /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading: nonexistent directory Welcome to Nemo2 buildroot login: root Password: # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.79 (root@dc70982830b0) (gcc version 8.3.0 (Buildroot 2020.02-rc1)) #1 SMP Mon Mar 16 23:56:43 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Rose Point Navigation Systems Nemo 2 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x4a8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s38120 r0 d23320 u61440 [ 0.000000] pcpu-alloc: s38120 r0 d23320 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 478916K/522240K available (9216K kernel code, 868K rwdata, 2380K rodata, 1024K init, 7479K bss, 26940K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 869 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7480 kB) [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000107] OMAP clocksource: timer1 at 24000000 Hz [ 0.000640] timer_probe: no matching timers found [ 0.001569] Console: colour dummy device 80x30 [ 0.001631] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001649] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001665] ... MAX_LOCK_DEPTH: 48 [ 0.001681] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001697] ... CLASSHASH_SIZE: 4096 [ 0.001712] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001728] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001743] ... CHAINHASH_SIZE: 32768 [ 0.001759] memory used by lock dependency info: 4655 kB [ 0.001775] per task-struct memory footprint: 1536 bytes [ 0.001862] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078575] pid_max: default: 32768 minimum: 301 [ 0.079027] Security Framework initialized [ 0.079175] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079199] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082469] CPU: Testing write buffer coherency: ok [ 0.082652] CPU0: Spectre v2: using BPIALL workaround [ 0.084149] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.086580] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.087245] rcu: Hierarchical SRCU implementation. [ 0.089396] smp: Bringing up secondary CPUs ... [ 0.089428] smp: Brought up 1 node, 1 CPU [ 0.089449] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.089466] CPU: All CPU(s) started in SVC mode. [ 0.093564] devtmpfs: initialized [ 0.121909] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.122728] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.122804] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.124525] xor: measuring software checksum speed [ 0.218579] arm4regs : 1214.000 MB/sec [ 0.318573] 8regs : 1088.800 MB/sec [ 0.418572] 32regs : 1086.400 MB/sec [ 0.518570] neon : 1577.200 MB/sec [ 0.518590] xor: using function: neon (1577.200 MB/sec) [ 0.518625] pinctrl core: initialized pinctrl subsystem [ 0.523817] NET: Registered protocol family 16 [ 0.531168] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.636422] audit: initializing netlink subsys (disabled) [ 0.639448] cpuidle: using governor menu [ 0.654455] audit: type=2000 audit(0.630:1): state=initialized audit_enabled=0 res=1 [ 0.655248] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) [ 0.655668] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31) [ 0.655884] OMAP GPIO hardware version 0.1 [ 0.658209] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) [ 0.658443] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63) [ 0.660736] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) [ 0.660979] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95) [ 0.662994] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) [ 0.663232] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127) [ 0.684247] No ATAGs? [ 0.684272] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.707662] cryptd: max_cpu_qlen set to 1000 [ 0.725032] edma 49000000.edma: TI EDMA DMA engine driver [ 0.726226] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' [ 0.731376] SCSI subsystem initialized [ 0.732698] libata version 3.00 loaded. [ 0.733270] usbcore: registered new interface driver usbfs [ 0.733482] usbcore: registered new interface driver hub [ 0.733655] usbcore: registered new device driver usb [ 0.735145] pps_core: LinuxPPS API ver. 1 registered [ 0.735170] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.735226] PTP clock support registered [ 0.736579] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.740993] clocksource: Switched to clocksource timer1 [ 0.917189] VFS: Disk quotas dquot_6.6.0 [ 0.917405] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.945357] NET: Registered protocol family 2 [ 0.947668] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) [ 0.947762] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.947862] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.948408] TCP: Hash tables configured (established 4096 bind 4096) [ 0.948819] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.948934] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.949384] NET: Registered protocol family 1 [ 0.952630] RPC: Registered named UNIX socket transport module. [ 0.952718] RPC: Registered udp transport module. [ 0.952738] RPC: Registered tcp transport module. [ 0.952756] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.952791] PCI: CLS 0 bytes, default 64 [ 0.956200] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.967369] Initialise system trusted keyrings [ 0.968343] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.972185] NFS: Registering the id_resolver key type [ 0.972358] Key type id_resolver registered [ 0.972429] Key type id_legacy registered [ 0.972605] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.992137] Key type asymmetric registered [ 0.992404] Asymmetric key parser 'x509' registered [ 0.992599] io scheduler noop registered [ 0.992627] io scheduler deadline registered [ 0.992830] io scheduler cfq registered (default) [ 0.992856] io scheduler mq-deadline registered [ 0.992876] io scheduler kyber registered [ 0.996368] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 1.003917] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.007717] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.021506] console [ttyS0] disabled [ 1.022024] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.744096] console [ttyS0] enabled [ 1.750706] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 31, base_baud = 3000000) is a 8250 [ 1.762533] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250 [ 1.774118] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 33, base_baud = 3000000) is a 8250 [ 1.785587] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 34, base_baud = 3000000) is a 8250 [ 1.799439] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.807136] random: fast init done [ 1.811095] random: crng init done [ 1.846875] brd: module loaded [ 1.878128] loop: module loaded [ 1.885166] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.895139] mdio_bus fixed-0: GPIO lookup for consumer reset [ 1.895159] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 1.895264] mdio_bus fixed-0: No GPIO consumer reset found [ 1.895493] libphy: Fixed MDIO Bus: probed [ 1.899640] CAN device driver interface [ 1.906219] c_can_platform 481d0000.can: c_can_platform device registered (regs=6f080d91, irq=39) [ 1.931937] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset [ 1.931964] mdio_bus 4a101000.mdio: using device tree for GPIO lookup [ 1.932006] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@4a100000/mdio@4a101000[0]' [ 1.932038] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/ethernet@4a100000/mdio@4a101000[0]' [ 1.932056] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup [ 1.932073] mdio_bus 4a101000.mdio: No GPIO consumer reset found [ 1.990971] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.998731] davinci_mdio 4a101000.mdio: detected phy mask fffffffd [ 2.005789] MDIO: davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffd] [ 2.014813] libphy: 4a101000.mdio: probed [ 2.018880] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver TI DP83822 [ 2.028893] cpsw 4a100000.ethernet: Detected MACID = 60:64:05:33:19:6e [ 2.036050] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 2.042573] cpsw 4a100000.ethernet: ALE Table size 1024 [ 2.047904] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.061511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.068107] ehci-pci: EHCI PCI platform driver [ 2.072830] ehci-platform: EHCI generic platform driver [ 2.078523] ehci-omap: OMAP-EHCI Host Controller driver [ 2.084775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.091200] ohci-pci: OHCI PCI platform driver [ 2.095784] ohci-platform: OHCI generic platform driver [ 2.102128] usbcore: registered new interface driver usb-storage [ 2.108434] usbcore: registered new interface driver usbserial_generic [ 2.115511] usbserial: USB Serial support registered for generic [ 2.122083] usbcore: registered new interface driver ftdi_sio [ 2.127940] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.135460] usbcore: registered new interface driver pl2303 [ 2.141204] usbserial: USB Serial support registered for pl2303 [ 2.147228] usbcore: registered new interface driver usb_serial_simple [ 2.153927] usbserial: USB Serial support registered for carelink [ 2.160123] usbserial: USB Serial support registered for zio [ 2.165964] usbserial: USB Serial support registered for funsoft [ 2.172138] usbserial: USB Serial support registered for flashloader [ 2.178597] usbserial: USB Serial support registered for google [ 2.184678] usbserial: USB Serial support registered for libtransistor [ 2.191369] usbserial: USB Serial support registered for vivopay [ 2.197476] usbserial: USB Serial support registered for moto_modem [ 2.203908] usbserial: USB Serial support registered for motorola_tetra [ 2.210627] usbserial: USB Serial support registered for novatel_gps [ 2.217155] usbserial: USB Serial support registered for hp4x [ 2.223065] usbserial: USB Serial support registered for suunto [ 2.229086] usbserial: USB Serial support registered for siemens_mpi [ 2.239583] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset [ 2.239605] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup [ 2.239652] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' [ 2.239685] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' [ 2.239703] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup [ 2.239721] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found [ 2.239739] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect [ 2.239751] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup [ 2.239782] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' [ 2.239812] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' [ 2.239827] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup [ 2.239841] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found [ 2.239979] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.250945] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 [ 2.264550] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset [ 2.264575] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup [ 2.264624] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' [ 2.264658] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' [ 2.264677] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup [ 2.264693] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found [ 2.264710] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect [ 2.264722] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup [ 2.264752] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' [ 2.264782] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' [ 2.264797] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup [ 2.264811] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found [ 2.264938] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.275353] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 [ 2.304991] mousedev: PS/2 mouse device common for all mice [ 2.316669] omap_rtc 44e3e000.rtc: registered as rtc0 [ 2.323532] i2c /dev entries driver [ 2.331978] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.343620] sdhci: Secure Digital Host Controller Interface driver [ 2.349862] sdhci: Copyright(c) Pierre Ossman [ 2.355694] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 2.355715] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.355765] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.355797] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.355816] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.355832] omap_hsmmc 48060000.mmc: No GPIO consumer cd found [ 2.355851] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 2.355863] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.355893] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.355923] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.355938] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.355951] omap_hsmmc 48060000.mmc: No GPIO consumer wp found [ 2.357443] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 [ 2.391777] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd [ 2.391798] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.391839] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.391870] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.391888] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.391904] omap_hsmmc 481d8000.mmc: No GPIO consumer cd found [ 2.391923] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.391935] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.391965] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.391994] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.392009] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.392023] omap_hsmmc 481d8000.mmc: No GPIO consumer wp found [ 2.392956] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 [ 2.424748] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.432072] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led2[0]' - status (0) [ 2.432204] gpio gpiochip1: Persistence not supported for GPIO 21 [ 2.432218] no flags found for gpios [ 2.433456] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led3[0]' - status (0) [ 2.433495] gpio gpiochip1: Persistence not supported for GPIO 22 [ 2.433506] no flags found for gpios [ 2.433971] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led4[0]' - status (0) [ 2.434000] gpio gpiochip1: Persistence not supported for GPIO 23 [ 2.434011] no flags found for gpios [ 2.434276] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led5[0]' - status (0) [ 2.434303] gpio gpiochip1: Persistence not supported for GPIO 24 [ 2.434313] no flags found for gpios [ 2.436130] ledtrig-cpu: registered to indicate activity on CPUs [ 2.446541] remoteproc remoteproc0: wkup_m3 is available [ 2.456755] oprofile: using arm/armv7 [ 2.461214] wireguard: WireGuard 0.0.20191012 loaded. See www.wireguard.com for information. [ 2.469720] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 2.480043] Initializing XFRM netlink socket [ 2.485055] NET: Registered protocol family 10 [ 2.494623] Segment Routing with IPv6 [ 2.498480] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.506767] NET: Registered protocol family 17 [ 2.511705] NET: Registered protocol family 15 [ 2.516193] can: controller area network core (rev 20170425 abi 9) [ 2.522735] NET: Registered protocol family 29 [ 2.527252] can: raw protocol (rev 20170425) [ 2.531799] can: broadcast manager protocol (rev 20170425 t) [ 2.537529] can: netlink gateway (rev 20170425) max_hops=1 [ 2.543289] can: isotp protocol (rev 20181217 alpha) [ 2.548702] NET: Registered protocol family 35 [ 2.553633] Key type dns_resolver registered [ 2.558108] ThumbEE CPU extension supported. [ 2.562547] Registering SWP/SWPB emulation handler [ 2.574723] omap_voltage_late_init: Voltage driver support not added [ 2.581540] sr_dev_init: Unknown instance smartreflex0 [ 2.587235] PM: Cannot get wkup_m3_ipc handle [ 2.591998] SmartReflex Class3 initialized [ 2.596724] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.607537] mmc0: new high speed SDHC card at address 0007 [ 2.615565] Loading compiled-in X.509 certificates [ 2.624134] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 2.687400] mmcblk0: p1 p2 [ 2.708726] mmc1: new high speed MMC card at address 0001 [ 2.717492] mmcblk1: mmc1:0001 W62704 3.56 GiB [ 2.724013] mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB [ 2.731712] mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB [ 2.740293] mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB, chardev (247:0) [ 2.784734] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.790573] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.800604] remoteproc remoteproc0: powering up wkup_m3 [ 2.822841] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 2.830660] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 [ 2.840708] remoteproc remoteproc0: request_firmware failed: -2 [ 2.847000] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed [ 2.853745] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 2.863691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.872356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.879629] usb usb1: Product: MUSB HDRC host driver [ 2.884720] usb usb1: Manufacturer: Linux 4.19.79 musb-hcd [ 2.890243] usb usb1: SerialNumber: musb-hdrc.1 [ 2.898529] hub 1-0:1.0: USB hub found [ 2.903321] hub 1-0:1.0: 1 port detected [ 2.913812] cpu cpu0: Linked as a consumer to regulator.3 [ 2.919827] cpu cpu0: Dropping the link to regulator.3 [ 2.928152] cpu cpu0: Linked as a consumer to regulator.3 [ 2.938558] PM: Cannot get wkup_m3_ipc handle [ 2.944577] PM: Cannot get wkup_m3_ipc handle [ 2.951349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.960038] sr_init: No PMIC hook to init smartreflex [ 4.337335] EXT4-fs (mmcblk0p2): recovery complete [ 4.349194] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.357714] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 4.367506] devtmpfs: mounted [ 4.372880] Freeing unused kernel memory: 1024K [ 4.378451] Run /sbin/init as init process [ 4.532319] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.240277] net eth0: initializing cpsw version 1.12 (0) [ 5.255875] TI DP83822 4a101000.mdio:01: attached PHY driver [TI DP83822] (mii_bus:phy_addr=4a101000.mdio:01, irq=POLL) [ 5.277573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.403197] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 8.415389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready #