U-Boot SPL 2018.01-dirty (Jun 06 2019 - 10:47:13) Trying to boot from MMC1 U-Boot 2018.01-dirty (Jun 06 2019 - 10:47:13 +0200) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Global external warm reset has occurred. Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black not set. Validating first E-fuse MAC Net: eth0: MII MODE Could not get PHY for cpsw: addr 0 cpsw, usb_ether ****U BOOT MAIN LOOP****. CLI init CLI init done preboot cmd preboot cmd done bootdelay_process bootdelay process done autoboot cmd Press SPACE to abort autoboot in 2 seconds board_name=[BBBL] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2096 bytes read in 36 ms (56.6 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.14.67-ti-r73 ... 10379776 bytes read in 682 ms (14.5 MiB/s) loading /boot/dtbs/4.14.67-ti-r73/am335x-boneblue.dtb ... 61805 bytes read in 46 ms (1.3 MiB/s) loading /boot/initrd.img-4.14.67-ti-r73 ... 4530411 bytes read in 319 ms (13.5 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ... debug: [bootz 0x82000000 0x88080000:4520eb 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fbad000, end 8ffff0eb ... OK Loading Device Tree to 8fb9a000, end 8fbac16c ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.67-ti-r73 (root@b2-am57xx-beagle-x15-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Thu Aug 30 00:08:52 UTC 2018 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x Medea APB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x458 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @df927000 s41548 r8192 d23988 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 441160K/522240K available (13312K kernel code, 1165K rwdata, 4344K rodata, 1024K init, 377K bss, 31928K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0e00000 (14304 kB) [ 0.000000] .init : 0xc1400000 - 0xc1500000 (1024 kB) [ 0.000000] .data : 0xc1500000 - 0xc1623430 (1166 kB) [ 0.000000] .bss : 0xc162db68 - 0xc168c05c ( 378 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42569 entries in 125 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000040] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000052] OMAP clocksource: timer1 at 24000000 Hz [ 0.000787] timer_probe: no matching timers found [ 0.001005] Console: colour dummy device 80x30 [ 0.001034] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.001041] This ensures that you still see kernel messages. Please [ 0.001048] update your kernel commandline. [ 0.001074] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.046899] pid_max: default: 32768 minimum: 301 [ 0.047177] Security Framework initialized [ 0.047198] Yama: becoming mindful. [ 0.047241] AppArmor: AppArmor disabled by boot time parameter [ 0.047323] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.047337] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.048364] CPU: Testing write buffer coherency: ok [ 0.048893] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.063006] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.070919] Hierarchical SRCU implementation. [ 0.082034] EFI services will not be available. [ 0.086928] smp: Bringing up secondary CPUs ... [ 0.086949] smp: Brought up 1 node, 1 CPU [ 0.086960] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.086970] CPU: All CPU(s) started in SVC mode. [ 0.088545] devtmpfs: initialized [ 0.107235] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.107713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.107744] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.111741] xor: measuring software checksum speed [ 0.150932] arm4regs : 1217.000 MB/sec [ 0.190895] 8regs : 1091.000 MB/sec [ 0.230894] 32regs : 1088.000 MB/sec [ 0.270894] neon : 1665.000 MB/sec [ 0.270904] xor: using function: neon (1665.000 MB/sec) [ 0.270925] pinctrl core: initialized pinctrl subsystem [ 0.271717] DMI not present or invalid. [ 0.272175] NET: Registered protocol family 16 [ 0.275998] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.283643] omap_hwmod: rtc: no dt node [ 0.283668] ------------[ cut here ]------------ [ 0.283708] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2494 _init.constprop.25+0x26c/0x5e0 [ 0.283718] omap_hwmod: rtc: doesn't have mpu register target base [ 0.283727] Modules linked in: [ 0.283752] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.67-ti-r73 #1 [ 0.283761] Hardware name: Generic AM33XX (Flattened Device Tree) [ 0.283808] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 0.283833] [] (show_stack) from [] (dump_stack+0x80/0x94) [ 0.283866] [] (dump_stack) from [] (__warn+0xf8/0x110) [ 0.283884] [] (__warn) from [] (warn_slowpath_fmt+0x58/0x74) [ 0.283902] [] (warn_slowpath_fmt) from [] (_init.constprop.25+0x26c/0x5e0) [ 0.283922] [] (_init.constprop.25) from [] (__omap_hwmod_setup_all+0x50/0x110) [ 0.283940] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x64/0x19c) [ 0.283956] [] (do_one_initcall) from [] (kernel_init_freeable+0x160/0x1f8) [ 0.283981] [] (kernel_init_freeable) from [] (kernel_init+0x18/0x128) [ 0.284004] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.284026] ---[ end trace 2b80407d10c9b2cf ]--- [ 0.304306] omap_hwmod: debugss: _wait_target_disable failed [ 0.357078] cpuidle: using governor menu [ 0.363008] OMAP GPIO hardware version 0.1 [ 0.365888] GPIO line 106 (LS_BUF_EN) hogged as output/high [ 0.376488] No ATAGs? [ 0.376508] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.376861] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.376877] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.470966] raid6: neonx2 gen() 1883 MB/s [ 0.538933] raid6: neonx2 xor() 1497 MB/s [ 0.538945] raid6: using algorithm neonx2 gen() 1883 MB/s [ 0.538954] raid6: .... xor() 1497 MB/s, rmw enabled [ 0.538964] raid6: using neon recovery algorithm [ 0.546155] edma 49000000.edma: TI EDMA DMA engine driver [ 0.550001] SCSI subsystem initialized [ 0.551401] usbcore: registered new interface driver usbfs [ 0.551466] usbcore: registered new interface driver hub [ 0.551582] usbcore: registered new device driver usb [ 0.552179] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.553627] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 0.553907] media: Linux media interface: v0.10 [ 0.553964] Linux video capture interface: v2.00 [ 0.554132] pps_core: LinuxPPS API ver. 1 registered [ 0.554144] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554170] PTP clock support registered [ 0.554316] dmi: Firmware registration failed. [ 0.554764] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.559170] FPGA manager framework [ 0.559274] Advanced Linux Sound Architecture Driver Initialized. [ 0.559976] NetLabel: Initializing [ 0.559993] NetLabel: domain hash size = 128 [ 0.560001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.560089] NetLabel: unlabeled traffic allowed by default [ 0.563358] clocksource: Switched to clocksource timer1 [ 0.728734] VFS: Disk quotas dquot_6.6.0 [ 0.728866] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.740874] NET: Registered protocol family 2 [ 0.741768] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.741820] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.741881] TCP: Hash tables configured (established 4096 bind 4096) [ 0.742001] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.742028] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.742253] NET: Registered protocol family 1 [ 0.751220] RPC: Registered named UNIX socket transport module. [ 0.751240] RPC: Registered udp transport module. [ 0.751249] RPC: Registered tcp transport module. [ 0.751257] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.751975] Unpacking initramfs... [ 0.999811] Freeing initrd memory: 4428K [ 1.000368] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.000632] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.002317] audit: initializing netlink subsys (disabled) [ 1.003740] audit: type=2000 audit(1.000:1): state=initialized audit_enabled=0 res=1 [ 1.003925] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.009826] zbud: loaded [ 1.017443] NFS: Registering the id_resolver key type [ 1.017493] Key type id_resolver registered [ 1.017503] Key type id_legacy registered [ 1.017525] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.017892] fuse init (API version 7.26) [ 1.018500] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.019422] random: fast init done [ 1.037636] Key type asymmetric registered [ 1.037661] Asymmetric key parser 'x509' registered [ 1.037795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.042153] io scheduler noop registered [ 1.042172] io scheduler deadline registered [ 1.042562] io scheduler cfq registered (default) [ 1.042576] io scheduler mq-deadline registered [ 1.044515] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.045685] gpio-of-helper ocp:cape-universal: ready [ 1.048618] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.050037] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.053798] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 2.037557] console [ttyS0] enabled [ 2.042341] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 31, base_baud = 3000000) is a 8250 [ 2.051532] serial serial0: tty port ttyS3 registered [ 2.058719] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 2.066143] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0 [ 2.073736] usbcore: registered new interface driver udl [ 2.083530] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.090793] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.097971] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.105149] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.115175] libphy: Fixed MDIO Bus: probed [ 2.120270] CAN device driver interface [ 2.125773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.132443] ehci-platform: EHCI generic platform driver [ 2.137919] ehci-omap: OMAP-EHCI Host Controller driver [ 2.143729] usbcore: registered new interface driver usb-storage [ 2.152332] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.165042] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.179019] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 2.184503] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 2.192293] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.199164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.206446] usb usb1: Product: MUSB HDRC host driver [ 2.211457] usb usb1: Manufacturer: Linux 4.14.67-ti-r73 musb-hcd [ 2.217600] usb usb1: SerialNumber: musb-hdrc.1 [ 2.223007] hub 1-0:1.0: USB hub found [ 2.226967] hub 1-0:1.0: 1 port detected [ 2.241988] i2c /dev entries driver [ 2.246300] Driver for 1-wire Dallas network protocol. [ 2.253885] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.261361] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 2.271049] cpuidle: enable-method property 'ti,am3352' found operations [ 2.278369] sdhci: Secure Digital Host Controller Interface driver [ 2.284661] sdhci: Copyright(c) Pierre Ossman [ 2.289505] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.410673] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.423090] mmc1: new high speed MMC card at address 0001 [ 2.428657] mmc0: new high speed SDHC card at address aaaa [ 2.435139] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 2.440745] mmcblk0: p1 [ 2.445277] mmcblk1: mmc1:0001 W62704 3.56 GiB [ 2.450414] mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB [ 2.456899] mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB [ 2.463284] mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB [ 2.470555] mmcblk1: p1 [ 2.495752] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.506428] ledtrig-cpu: registered to indicate activity on CPUs [ 2.512867] dmi-sysfs: dmi entry is absent. [ 2.517721] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.523920] omap-aes 53500000.aes: will run requests pump with realtime priority [ 2.533820] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.543901] hidraw: raw HID events driver (C) Jiri Kosina [ 2.550292] usbcore: registered new interface driver usbhid [ 2.556105] usbhid: USB HID core driver [ 2.560608] remoteproc remoteproc0: wkup_m3 is available [ 2.571045] wireguard: WireGuard 0.0.20180809 loaded. See www.wireguard.com for information. [ 2.579994] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld . All Rights Reserved. [ 2.590530] NET: Registered protocol family 10 [ 2.600704] Segment Routing with IPv6 [ 2.604583] mip6: Mobile IPv6 [ 2.607630] NET: Registered protocol family 17 [ 2.612132] can: controller area network core (rev 20170425 abi 9) [ 2.618458] NET: Registered protocol family 29 [ 2.623061] Key type dns_resolver registered [ 2.627387] mpls_gso: MPLS GSO support [ 2.631426] omap_voltage_late_init: Voltage driver support not added [ 2.638205] ThumbEE CPU extension supported. [ 2.642615] usb 1-1: new low-speed USB device number 2 using musb-hdrc [ 2.649452] Registering SWP/SWPB emulation handler [ 2.655555] registered taskstats version 1 [ 2.659843] zswap: loaded using pool lzo/zbud [ 2.666639] Btrfs loaded, crc32c=crc32c-generic [ 2.671428] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.677846] ima: Allocated hash algorithm: sha256 [ 2.729281] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 2.740712] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.746567] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.755072] tda998x 0-0070: Error -121 writing to cec:0xff [ 2.760735] tda998x 0-0070: set_page 000a err -121 [ 2.779412] usb 1-1: device descriptor read/64, error -71 [ 2.823445] tda998x 0-0070: set_page 000a err -121 [ 2.887434] tda998x 0-0070: set_page 0001 err -121 [ 2.892405] tda998x 0-0070: set_page 0001 err -121 [ 2.897388] tda998x 0-0070: set_page 0200 err -121 [ 2.902364] tda998x 0-0070: set_page 0201 err -121 [ 2.907410] tda998x 0-0070: set_page 0202 err -121 [ 2.912312] tda998x 0-0070: set_page 0203 err -121 [ 2.917223] tda998x 0-0070: set_page 0204 err -121 [ 2.922138] tda998x 0-0070: set_page 0205 err -121 [ 2.927052] tda998x 0-0070: set_page 020e err -121 [ 2.931967] tda998x 0-0070: set_page 0211 err -121 [ 2.936879] tda998x 0-0070: set_page 0207 err -121 [ 2.941793] tda998x 0-0070: set_page 0208 err -121 [ 2.946704] tda998x 0-0070: set_page 0209 err -121 [ 2.951605] tda998x 0-0070: set_page 020a err -121 [ 2.956517] tda998x 0-0070: set_page 0206 err -121 [ 2.961433] tda998x 0-0070: set_page 0027 err -121 [ 2.966344] tda998x 0-0070: set_page 0000 err -121 [ 2.971256] tda998x 0-0070: set_page 0002 err -121 [ 2.976364] tilcdc 4830e000.lcdc: failed to bind 0-0070 (ops tda998x_ops): -6 [ 2.983967] tilcdc 4830e000.lcdc: master bind failed: -6 [ 2.989733] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.997074] remoteproc remoteproc0: powering up wkup_m3 [ 3.002552] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 3.011036] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 3.017608] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 [ 3.027848] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,BLA2,1736EL001688' [ 3.035201] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4 [ 3.072420] bone_capemgr bone_capemgr: slot #0: No cape found [ 3.103378] usb 1-1: device descriptor read/64, error -71 [ 3.108841] bone_capemgr bone_capemgr: slot #1: No cape found [ 3.136429] bone_capemgr bone_capemgr: slot #2: No cape found [ 3.167406] bone_capemgr bone_capemgr: slot #3: No cape found [ 3.173277] bone_capemgr bone_capemgr: initialized OK. [ 3.184597] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1000000 KHz [ 3.192221] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1000000000 (-34) [ 3.203298] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz [ 3.213782] hctosys: unable to open rtc device (rtc0) [ 3.219033] of_cfs_init [ 3.221992] of_cfs_init: OK [ 3.225645] wlan-en-regulator: disabling [ 3.229694] ALSA device list: [ 3.232713] No soundcards found. [ 3.241814] Freeing unused kernel memory: 1024K Loading, please wait... [ 3.347578] usb 1-1: new low-speed USB device number 3 using musb-hdrc [ 3.487453] usb 1-1: device descriptor read/64, error -71 [ 3.735454] usb 1-1: device descriptor read/64, error -71 starting version 232 [ 3.824381] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.840783] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.854284] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.855712] usb usb1-port1: attempt power cycle [ 4.299609] usb 1-1: new low-speed USB device number 4 using musb-hdrc [ 4.855570] usb 1-1: new low-speed USB device number 5 using musb-hdrc Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Warning: fsck not present, so skipping root file system [ 7.191514] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 7.198979] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 7.299165] EXT4-fs (mmcblk0p1): recovery complete [ 7.318182] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 7.957993] systemd[1]: System time before build time, advancing clock. [ 8.069551] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.127961] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 8.147061] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 8.179790] systemd[1]: Set hostname to . [ 8.932205] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 8.949139] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 8.969598] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 8.996519] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 9.018455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 9.045526] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 9.064641] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ OK ] Reached target Remote File Systems. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket. Starting Set the console keyboard layout... Mounting /sys/kernel/debug... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Dispatch Password Requests to Console Directory Watch. Starting Journal Service... [ OK ] Reached target Slices. [ OK ] Reached target Swap. Starting Load Kernel Modules... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Encrypted Volumes. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Created slice system-getty.slice. [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/debug. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... [ OK ] Started File System Check on Root Device. Starting Remount Root and Kernel File Systems... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 10.335575] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ 11.013660] systemd-journald[283]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Set the console keyboard layout. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Set console font and keymap... [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... Mounting Configuration File System... Mounting FUSE Control File System... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. Starting Raise network interfaces... [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on cloud9.socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on node-red.socket. [ OK ] Listening on bonescript.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Connection service... Starting Generic Board Startup... [ OK ] Started Regular background program processing daemon. Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting robotcontrol... Starting System Logging Service... Starting rc_battery_monitor... Starting LSB: Start daemon at boot time... Starting Login Service... Starting Avahi mDNS/DNS-SD Stack... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting BB WL18xx wlan0 Service... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Deferred execution scheduler. Starting LSB: Start busybox udhcpd at boot time... [ OK ] Started Bonescript autorun. [ OK ] Started System Logging Service. [ OK ] Started robotcontrol. [ OK ] Started rc_battery_monitor. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started BB WL18xx wlan0 Service. [ 17.526492] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 17.817855] random: crng init done [ 17.821302] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Started LSB: Start daemon at boot time. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started Connection service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Starting Hostname Service... Starting WPA supplicant... [ OK ] Started Raise network interfaces. [ 20.086734] using random self ethernet address [ 20.103829] using random host ethernet address [ OK ] Started WPA supplicant. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting Permit User Sessions... [ 20.407204] using random self ethernet address [ 20.431716] using random host ethernet address Starting The Apache HTTP Server... Starting OpenBSD Secure Shell server... [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Hostname Service. [ OK ] Started Getty on tty1. [ 21.197807] Mass Storage Function, version: 2009/09/11 [ 21.235551] LUN: removable file: (no medium) Starting LSB: set CPUFreq kernel parameters... [ 21.679562] usb0: HOST MAC f4:5e:ab:f4:6e:ba [ 21.726675] usb0: MAC f4:5e:ab:f4:6e:bb [ 21.781906] usb1: HOST MAC f4:5e:ab:f4:6e:bd [ 21.824501] usb1: MAC f4:5e:ab:f4:6e:be [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Generic Board Startup. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started The Apache HTTP Server. [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. [ 27.204000] configfs-gadget gadget: full-speed config #1: c Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2018-08-30 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: