U-Boot SPL 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500)
Trying to boot from MMC1
Loading Environment from EXT4... ** File not found /boot/uboot.env **

** Unable to read "/boot/uboot.env" from mmc0:1 **
Failed (-5)


U-Boot 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500), Build: jenkins-github_Bootloader-Builder-47

CPU  : AM335X-GP rev 2.1
I2C:   ready
DRAM:  512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: External.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **

** Unable to read "/boot/uboot.env" from mmc0:1 **
Failed (-5)
Board: BeagleBone Black
Model: Octavo Systems OSD3358-SM-RED
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
Model: Octavo Systems OSD3358-SM-RED:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net:   eth0: MII MODE
Could not get PHY for cpsw: addr 0
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[OS00] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
0 bytes read in 40 ms (0 Bytes/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
** Invalid partition 2 **
** Invalid partition 3 **
** Invalid partition 4 **
** Invalid partition 5 **
** Invalid partition 6 **
** Invalid partition 7 **
switch to partitions #0, OK
mmc1(part 0) is current device
** No partition table - mmc 1 **
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
** No partition table - mmc 1 **
Checking for: /uEnv.txt ...
** No partition table - mmc 1 **
Checking for: /boot.scr ...
** No partition table - mmc 1 **
Checking for: /boot/boot.scr ...
** No partition table - mmc 1 **
Checking for: /boot/uEnv.txt ...
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
starting USB...
USB0:   Port not available.
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-98-5d-ad-4e-ab-fd
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A80102
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A8010
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A801
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A80
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A8
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/C
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm-am33xx
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Retrieving file: pxelinux.cfg/default
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.Config file not found
starting USB...
USB0:   Port not available.
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC 98:5d:ad:4e:ab:fd
HOST MAC de:ad:be:af:00:00
RNDIS ready
The remote end did not respond in time.=>